Advertisement
INSTALLATION
Install Inner Backplate
1
(2) Alternative Screws
* Alternative screws are provided to
replace pre-assembled mounting screws
if necessary.
Install Fixture Body
3
Install Glass Shade
5
Your installation is now complete! Restore electricity and save this sheet for future reference.
2
4
Apply Caulking
6
* Note: Do NOT caulk the bottom of the backplate to allow moisture to escape.
Downwards Installation
-
2
of 2 -
Wiring
White wire from supply
Black (or red) wire from supply
Ground wire from supply
Green ground screw
Install Bulb
Install
fixture markings and/or labels for
maximum wattage.
Recommended Bulb Type (not
included):
BULB BASE TYPE
Upwards Installation
White from fixture
Black from fixture
Ground wire
from fixture
the
correct bulb referring to
100W
MAX
BULB TYPE
Medium (E26)
TYPE A
Advertisement
