Remote Controller - KANDA Meeting Pro 360 User Manual

Remote Controller

1. The Kandao Meeting Pro and remote controller will be paired during production.
2. Power Button controls both sleep and wake modes of Kandao Meeting Pro.
3. The remote controller will be disconnected when Kandao Meeting Pro is under
sleep mode.
4. Press any button to reconnect the remote controller while the Kandao Meeting
Pro is waked up.
Notes:
1. The remote controller shall be equipped with two AAA batteries.
2. If the remote controller fails to pair with the camera, you can press and hold "OK"
and "VOL-" for 3 seconds at the same time, while the indicator light flashes. Enter
the setting page of Kandao Meeting Pro, and finds the Bluetooth device "Kandao
Meeting". The indicator Light will turn dark when the pairing issuccessful.
Updated Successfully
10