Subscribe to Our Youtube Channel
Related Manuals for Ghibli Junior 38 E
Summary of Contents for Ghibli Junior 38 E
- Page 1 OPERATION AND MAINTENANCE MANUAL Ghibli S.p.a Tel. +39 0382 848811 Via Circonvallazione, 5 Fax +39 0382 84668 27020 Dorno (PV) http://www.ghibli.it ITALY e-mail: info@ghibli.it...
- Page 2 MACHINE – DEALER INFORMATION MODEL : SERIAL NUMBER : PURCHASE NUMBER : DEALER : ADDRESS : PHONE : FAX: E-MAIL @ CONTACT PERSONS :...
- Page 3 PACKAGING “JUNIOR 38 E” MEASURES – VOLUMES – WEIGHTS PACKAGING SET 1 41.0021.00 Dear Customer, Packaging set code Thank you for choosing a GHIBLI product to clean your floor Volume 0,35 m³ areas. Total weight 68 kg The scrubber-dryer you have purchased has been designed to meet the user’s expectations in terms of user-friendliness and...
- Page 4 PROBLEM CAUSE SOLUTION The vacuum fan • Fan switch not enabled or • Enable or replace the switch. TABLE OF CONTENTS does not start damaged. • Water filter clogged • Clean the filter . 1) Machine range and identification page •...
- Page 5 GHIBLI warmly advises against other applications. To drain the recovery tank use the pipe in fig. 4, n.1. If necessary, the solution tank can also be emptied using the tube in fig. 5, n.5.
- Page 6 RECOMMENDATIONS AND CHECK-UP TESTS FOR THE SAFETY INSTRUCTIONS COMISSIONING OF THE MACHINE • Report any machine malfunctioning or faults to your supervisors. • When mixing chemical products carefully follow the instructions indicated on the containers. • After use or before carrying out maintenance operations, make sure that BRUSH : For best washing and cleaning results, use a brush that is the floor is level;...
- Page 7 FIG. 7 FIG. 1 BRUSH GROUP MACHINE OVERVIEW Closure cap for water + chemical 1 Handle solution filling 2 Ignition key 2 Motor differential 3 Handle regulation 3 Shock absorbing wheels 4 Handles recovery tank 4 Aluminium cover 5 Recovery tank Connection plug for scrubbing 6 Closure cap for water filling head + squeegee unit...
- Page 8 FIG. 5 FIG. 3 REAR VIEW – Lower part HANDLE 1 Printed circuit board 1 Brush and water activating button 2 Fuses 2 Squeegee activating lever 3 Ignition key Solenoid valve and water tap 4 Technical data sticker group 5 Water regulation tap FIG.
Need help?
Do you have a question about the Junior 38 E and is the answer not in the manual?
Questions and answers