Page 3
This manual is limited to uses herein described. For other appli- cations, contact your local Authorized SENTRY Distributor or Johnson Controls – Technical Services Department, Marinette, Wisconsin 54143-2542, USA. Note: The converted metric values in this manual are provided for dimensional reference only and do not reflect an actual measurement.
Page 4
EXPLANATION OF SAFETY ALERTS SENTRY Carbon Dioxide Hand Portable Fire Extinguishers REV. 05 2018-OCT-11 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) DANGER Indicates a hazardous situation in which a person will experience serious personal injury or death if the situation is not avoided.
TABLE OF CONTENTS SENTRY Carbon Dioxide Hand Portable Fire Extinguishers 2018-OCT-11 REV. 05 PAGE TOC-1 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) SECTION PAGE Introduction 1–2 Operation Inspection Maintenance 7–8 Recharge 9–10 Service and Repair 11–12...
Page 6
TABLE OF CONTENTS SENTRY Carbon Dioxide Hand Portable Fire Extinguishers PAGE TOC-2 REV. 05 2018-OCT-11 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) NOTES:...
Page 7
INTRODUCTION SENTRY Carbon Dioxide Hand Portable Fire Extinguishers 2018-OCT-11 REV. 05 PAGE 1 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) INTRODUCTION RECHARGE When utilized, the Occupational Safety and Health Act All extinguishers shall be recharged immediately after use, or (OSHA) rules require that ‘‘the employer shall be responsible when indicated by an inspection or maintenance examination.
INTRODUCTION SENTRY Carbon Dioxide Hand Portable Fire Extinguishers PAGE 2 REV. 05 2018-OCT-11 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) REFERENCES REFERENCES IN THIS MANUAL: AVAILABLE FROM: NFPA-10 “STANDARD FOR NFPA PORTABLE FIRE 1 Batterymarch Park EXTINGUISHERS”...
Page 9
From this position, air currents help carry agent into fire, fighting training at our fire school. Contact assure maximum visibility, provide protection from heat, Johnson Controls, One Stanton Street, and lessen exposure to possible harmful vapors. Marinette, WI 54143-2542, or your...
OPERATION SENTRY Carbon Dioxide Hand Portable Fire Extinguishers PAGE 4 REV. 05 2018-OCT-11 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) NOTES:...
Page 11
INSPECTION SENTRY Carbon Dioxide Hand Portable Fire Extinguishers 2018-OCT-11 REV. 05 PAGE 5 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) INSPECTION Inspection provides reasonable assurance the extinguisher is 7. Check hose couplings for tightness, corrosion or cracks. charged and operable.
INSPECTION SENTRY Carbon Dioxide Hand Portable Fire Extinguishers PAGE 6 REV. 05 2018-OCT-11 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) NOTES:...
Page 13
MAINTENANCE SENTRY Carbon Dioxide Hand Portable Fire Extinguishers 2018-OCT-11 REV. 05 PAGE 7 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) MAINTENANCE If a questionable condition exists, refer to Service and Repair 5. Weigh the unit. section, pages 11-12. 6.
RECHARGE SENTRY Carbon Dioxide Hand Portable Fire Extinguishers 2018-OCT-11 REV. 05 PAGE 9 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) RECHARGE Before recharging any extinguisher, visually examine the 3. Remove horn/hose assembly (10-15-20 lb models) or unit for any physical damage or impairment which may horn (5 lb model) as follows: further dictate the need for maintenance.
Page 16
RECHARGE SENTRY Carbon Dioxide Hand Portable Fire Extinguishers PAGE 10 REV. 05 2018-OCT-11 Operation, Inspection, Service and Maintenance, and Recharge Manual (Part No. 429425) RECHARGE (Continued) 7. Open fill line valve and fill cylinder to correct total weight* 12. Reinstall horn or horn/hose assembly. as stamped on valve assembly.
12 lists some of the possible irregularities that may develop and gives sugges- tions for corrective action. For further information, contact Johnson Controls. WARNING Contents under high pressure. Before removing or disassem- bling valve, make sure extinguisher is completely discharged.
Page 18
Do not leave open end of hose unattended unless adequately restrained to prevent whipping. Horn Cracked Replace horn. * Refer to Compressed Gas Association (CGA) pamphlets C-6 and C-6.1. ** Replacement maintenance nameplates from Johnson Controls will not have a UL manifest.
Need help?
Do you have a question about the SENTRY CD05-1 and is the answer not in the manual?
Questions and answers