Table of Contents
Advertisement
Quick Links
Modellbahn Digital Peter Stärz
Dresdener Str. 68 - D-02977 Hoyerswerda -
Degree of difficulty:
The ROCO-Adapter DSM-PIC-R is an adapter module for con-
necting turning platforms of the brand ROCO to the Turning
Platform Module DSM-PIC.
It is a pure accessory module and can only be used together
with the Turning Platform Module DSM-PIC.
In combination with the Turning Platform Controller DSM-PIC-
H it is then possible to steer the turning platform via pre-
selection of the position. Alternatively the steering can be
done via the SX-Bus.
A modified PIC is delivered for the Turning Platform Module
DSM-PIC to match with the ROCO turning platform.
Special features
-
Especially for connecting turning platforms of ROCO
-
No modification of the turning platform required
-
Easy wiring
ROCO-Adapter
for the Turning Platform Module DSM-PIC
easy
medium
difficult
+49 3571 404027 - www.firma-staerz.de - info@firma-staerz.de
Necessary skills:
-
Simple assembly and soldering procedure of the board
Table of content
Special features ............................................................................1
Technical specifications ................................................................2
Compatibility............................................................................. 2
Kit contents ...................................................................................2
Maintenance and care...................................................................2
Assembly instruction .....................................................................2
Component layout diagram on the PCB.................................... 2
Populated PCB ......................................................................... 2
Bringing into service......................................................................2
Description of operation ................................................................3
Jumper JP1 .............................................................................. 3
Solder bridges and sliding contacts........................................... 3
Terminal X3 .............................................................................. 3
Connecting to the Turning Platform Module DSM-PIC .............. 3
Connecting to the turning platform of ROCO............................. 3
detector .................................................................................... 4
Connecting a reed-contact or a Hall sensor (optional)............... 4
Parameters and Programming ......................................................4
Overview of settings ................................................................. 4
Steering the Turning Platform Module ...........................................5
DSM-PIC-R
v1-2014
Page 1 of 5
Advertisement
Table of Contents
Summary of Contents for Modellbahn Digital Peter Stärz DSM-PIC-R
- Page 1 Degree of difficulty: easy Simple assembly and soldering procedure of the board medium difficult The ROCO-Adapter DSM-PIC-R is an adapter module for con- Table of content necting turning platforms of the brand ROCO to the Turning Special features ................1 Platform Module DSM-PIC.
- Page 2 Wiring 33Ohm (orange, orange, black, golden, brown) The ROCO-Adapter DSM-PIC-R is to be connected as plug-in card 1kOhm (brown, black, black, brown, brown) with the ROCO turning platform on the one side and via a 8-pinned...
- Page 3 Jumper from 2 to 3 High speed Jumper from 3 to 4 Maximal speed The ROCO Adapter DSM-PIC-R is being connected to the Turning Platform Module DSM-PIC via X2 as shown in the following table, Solder bridges and sliding contacts also see the Connection scheme.
- Page 4 Overview of settings As the Turning Platform Module DSM-PIC is being populated with Setting Addr. 2 Disp. a dedicated PIC to work with the ROCO-Adapter DSM-PIC-R and Define current position as initial position Bit 1 a ROCO turning platform, some modifications and additions No effect during normal operation.
- Page 5 1-Detection, Detection test and auto correction Number of external tracks The 1-Detection defines which external track is interpreted as With this setting the number of external tracks is adjusted, up to 40 initial position (position 1) and how this shall be detected. An acti- are possible.
Need help?
Do you have a question about the DSM-PIC-R and is the answer not in the manual?
Questions and answers