Do you have a question about the I-Work Series and is the answer not in the manual?
Questions and answers
Summary of Contents for Baseus I-Work Series
Page 1
Baseus i-wok Series USB Stepless Dimming Screen Hanging Light Operation Manual Please read the instruction manual carefully before using the product and keep it with proper care Thank you for buying and using this product! To ensure a better operating experience, please refer to your product manual.
Page 2
Product description Product front view Product rear view USB interface Product side view Switch button Infinite dimmer knob Bracket Gravity base...
Page 3
Installation instructions �.As shown in the figure: adjust the angle between the “gravity base” and “bracket” according to the thickness of the screen that needs to install lamp; Remarks: It is suitable for screens with a thickness of �mm-��mm (the thinner the screen, the smaller the required angle;...
Page 4
�.Plug the USB power cable into the USB port of the lamp body, and connect the other end to the USB output port of the computer or the �V adapter. �.Turn the lamp body to adjust the angle of lighting and complete installing.
Page 5
Instructions for use �.Press the switch button to turn on the light, and press and hold for � seconds to turn off the light (standby state). �.When turning on for the first time, the default is white light, press for the second time to switch to warm light, press for the third time to switch to mixed light (white light + warm light), press for the fourth time to switch back to white light, and then cycle.
Page 6
Precautions �. Please use �V adapter or power supply equipment to supply power to the product, such as: computer, screen USB output port, �V adapter, power bank, etc.; if you use adapter or power supply equipment above �V to supply power to the product, it may cause product damage and bring security risks! �.
Need help?
Do you have a question about the I-Work Series and is the answer not in the manual?
Questions and answers