Summary of Contents for Harken Industrial IN106.2FT
Page 1
OPERATION AND INSTRUCTION MANUAL ROLLER SLING Model: IN106.2FT / IN106.3FT / 106.4FT / IN106.6FT WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS EQUIPMENT.
Read This Instruction Manual Carefully Before Using This Equipment. User Instructions must always be available to the user and are not to be removed except by the user of this equipment. For proper use, see supervisor, User Instructions, or contact the manufacturer. Compliant fall protection and emergency rescue systems help prevent serious injury during fall arrest.
Page 4
CONFIGURATIONS: *Note: Not recommended for use with pipe diameters under 3” (7.62 cm). Do not loop around sharp edges or small diameter structural members that could lessen structural integrity of the anchorage connector. BASKET ANCHOR VERTICAL ANCHOR Only make compatible connections! Due to the risk of improper loading, roller sling terminations must not be connected to each other by a single...
*The user shall be equipped with a means of limiting the maximum dynamic forces exerted on the user during the arrest of a fall to a maximum of 8 kN (1800-lbf ) to OSHA and 6 kN to EN. (ANCHOR POINT) WORK SURFACE *The structure the anchorage is...
WARNING LABEL LOCATION: Product description Model / part number Batch number Manufacture Read User Product date Manual certifications Manufacturer Warning information Materials CE Notified Body Ultimate tensile strength User weight/ limit DO NOT REMOVE WARNING LABEL! MAINTENANCE, CLEANING AND STORAGE Cleaning periodically will prolong the life and proper functioning of the product.
Page 7
INSPECTION AND MAINTENANCE LOG MODEL NUMBER: DATE OF PURCHASE: MODEL NUMBER: DATE OF MANUFACTURE: DATE OF FIRST USE: Date Serial Number Comments Inspector Name Pre-Use inspections MUST be completed prior to each use, by a competent person. Official periodic inspection must be performed at least semi-annually in accordance with all appropriate local standards.
Page 8
Worldwide Limited Warranty COVERAGE. HARKEN® warrants that each HARKEN • defects in material or workmanship that are manifested product, when properly used and maintained, will be free outside the warranty period; from defects in material and workmanship from the date of receipt of the product by the final customer.