Page 1
USER MANUAL www.photocentricgroup.com AND INSTALLATION GUIDE DISPOSAL INSTRUCTIONS Do not throw this electronic device into the waste when discarding. To minimize pollution and ensure utmost pro- tection of the global environment, please recycle or return to Photocentric for recycling.
Contents Service and Support team: European and Asia Pacific Customers 1. Safety Warnings support@photocentric.co.uk 2. Photocentric Wash 15 at a glance North and South American Customers 3. Unboxing & Installation 3Dsupport@photocentricusa.com 4. Ultrasonic Cleaning Principle 5. Product Operation- Cautions 6.
4. Ultrasonic cleaning 15 at a glance Installation principle The Wash 15 has been designed to remove all residual The Photocentric wash unit is an ultrasonic cleaner 3a. Location Requirements resin from printed models. for use in both industrial and domestic usage.
Page 4
Step 4: Place your printed part or platform Instructions fitted to the bracket into the ultrasonic cleaner. If your Photocentric Wash 15 is completely full of liquid with the printed The following instructions will ensure safe and parts immersed, then place the lid back in correct use of your Photocentric Wash unit: your cleaner to prevent spillage.
Photocentric cleaner inside. • It is advised to operate the machine with the lid • Empty the liquid out of your Photocentric wash securely wash unit. unit after either a month of usage, or when it • Do not use alcohol, gasoline, or flammable is no longer cleaning your parts properly, the solutions. Doing so could cause a fire or...
Need help?
Do you have a question about the Wash 15 and is the answer not in the manual?
Questions and answers