Electro-Harmonix MIG-50 Quick Start Manual

50W All Tube Guitar Amplifier
Congratulations on your purchase of the Electro-Harmonix MIG-50, an all tube, two
channel, 50W guitar amplifier head. The EHX MIG-50 is a faithful reissue of the
Sovtek MIG-50 with modern enhancements to both the electronics and mechnical
design. The MIG-50 comes installed with three 12AX7 preamp tubes and two 5881
power tubes.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Clean only with a dry cloth.

Do not block any ventilation openings.

Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched.

Unplug this amplifier during lightning storms or when unused for long periods of

time.
WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.
Do not expose this apparatus to dripping or splashing and ensure that no object

filled with liquids is placed on the equipment.
Maintain at least six inches of unobstructed air space behind the unit to allow for

proper ventilation and cooling. Air must be capable of freely moving around the
amplifier.
This amplifier is capable of producing very high sound pressure levels which may

cause temporary or permanent hearing damage. Use care when adjusting volume
levels during use.
Do not turn the amplifier on without a loudspeaker.

Refer all servicing and maintenance to qualified service personnel including

replacement of fuses and vacuum tubes. Changes and modifications not expressly
approved by EHX can void the warranty.
DO NOT attempt to remove the amplifier chassis. There are no serviceable parts.

MIG-50