Table of Contents
Advertisement
_________________________________________________________________________________________________________
For Remote Station (ms) type:
"config ms max fec dl 5" as shown
Where bs = base station
ms = remote station dl =
downlink
ul=uplink
fec=fec modulation code which can be 0, 1, 2, 3, 5, 6, 7*
(*Note: The FEC code 4 can be set but the max fec code will be 3)
2. Set Base Station (bs) Transmit Power
Type "config bs rf eirp 24" as shown:
Where bs = base station
24 = max transmit power (-39 to +36)
Set Maximum Remote Station Transmit Power,
Type "Config ms radio maxtxpower 24" as shown:
Where ms = remote station
24 = the maximum transmit power for the remote (range is -39 to 43
dBm).
Note: Transmit power can be less if the RF conditions support a lower transmit power level.
COM-00-21-05
Version No.: A
6-9
OPERATION
OCTOBER 2021
Advertisement
Table of Contents
