Sargent ASSA ABLOY 8800 Series Installation Instructions

Installation Instructions
8800 & 12-8800 Series
Rim Exit Device for 16, 28, 63, & 66 Functions
Product Overview
Rail Assembly
"Lock Down Key"
To operate: Depress pushrail; Insert hex key, and turn
counter clockwise.
Attention:
Not furnished with 12- (Fire Rated) Exit Devices.
Available Stock Lengths:
Length "E": 32" door, no cut off required. Can be cut to fit doors down to 24" wide.
Length "F": 36" door, no cut off required. Can be cut to fit doors down to 33" wide.
Length "J": 42" door, no cut off required. Can be cut to fit doors down to 37" wide.
Length "G": 48" door, no cut off required. Can be cut to fit doors down to 43" wide.
Before installation:
1. Install mullion, if used.
2. Fit and hang door.
3. Check the box's label for the size of the exit device.
1
Mark vertical and horizontal reference lines of the door (See Figure 1)
Surface of the door where exit device is applied, must be flush. Clear away any raised projections to allow exit device to rest on
the flat surface of the door.
a
Identify type of installation to determine the location of the vertical C.
A6703H 07/21
1-800-727-5477 • www.sargentlock.com
Mounting Plate
Copyright © 2008, 2012, 2021 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express
written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
End Cap
Center chassis
assembly (8828)
Cover
(8826,8863)
Center chassis
assembly (8863)
L
Rim Cylinder
Center chassis
649
assembly
Strike
(8816,8866)
Cover
(8816,8866)
Figure 1 Vertical & Horizontal Reference
37-5/8"
Mortise
Cylinder
Collar
41"