Charge - Nowley 21-2039 Instruction Manual

1. Charge

Before the first use, make sure it is fully charged.
In general, it can take about two hours to be fully charged. Use the charger
included with the device and put it on the smartwatch by matching its tips to
the charging contact points.
Then connect the USB (charger end) to a computer output or to a 5V-1A
power supply.
IMPORTANT: Do not connect it to a power supply that exceeds 5V-1A (5
volts, 1 amp) because the circuit may be damaged and the battery can
stop charging.
When the watch is charging, a charging symbol will appear on the screen.
If it does not charge, check that you have placed the charger correctly.
4/21