Mania AGOO 3 IN 1 Instruction Manual

INSTRUCTION MANUAL
BABY BOTTLE STERILIZER AND
WARMER AGOO 3 IN 1

PACKAGE CONTENTS

•
Bottle warmer
•
Cover
•
Tongs
•
Bottle sponge

TECHNICAL SPECIFICATIONS

•
Rated voltage: 220 V
•
Rated frequency: 50 Hz
•
Rated power 150 W
•
Heating element: PTC
•
Size: 12.8 × 19.8 × 24 cm

COMPONENTS

(1) Mode select dial
(2) Cover
(3) Bottle sponge
(4) Tongs

HOW TO USE

•
The bottle warmer has three modes of
operation: Warm milk (40 °C), Heat food
(70 °C), Sterilization (100 °C).
O WARM MILK
•
Make sure that the dial is turned to "OFF"
and that the warmer is not plugged in yet.
Also make sure that the warmer is on a flat
and level surface.
•
Pour 240–300 ml of water into the warmer.
Make sure you do not exceed the MAX
label.
•
Place the bottles of milk into the water and
plug the warmer's cord into an electrical
socket. The light on the dial will turn green.
•
Turn the dial to the "Warm milk" position.
The light will turn red, indicating that the
warmer is working. Do not cover the
warmer with the lid!
•
It takes about 10 min to warm a 240 ml
bottle of milk. The light will turn green
when the warmer reaches the desired
temperature.
O HEAT FOOD
•
Follow all the additional recommendations
from the previous section.
•
Pour 240–300 ml of water into the warmer.
•
Place the food container into the water.
•
Cover the warmer with the included
transparent cover.
•
Turn the dial to "Heat food". The red light
indicates that the warmer is working.
•
The light will turn green when the warmer
reaches the desired temperature.
O STERILIZATION
•
Pour 120–150 ml of water into the warmer.
•
Put all the accessories you wish to sterilize
into the warmer.