Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Pixapro Core2400 Pro
-
Page 2: Table Of Contents
Contents Foreword Sync Triggering Warning Protection Function Name of Parts Technical Data Power Pack Firmware Upgrade Display Maintenance Included Accessories Optional Accessories Power Supply Operation Power On Light Selection Modeling Lamp Wireless Mode Selection 2.4G Wireless Mode 433MHz Wireless Mode Flash Mode—... -
Page 3: Warning
Head(optional), the ultra-bright LED Modeling light, and with CORE2400 built-in 2.4G wireless ONE system and 433MHz wireless, Always keep this product dry. Do not use in rain or in damp it is compatible with PIXAPRO triggers like ST-IV, ST-III and ST-III+ conditions. and PRO AC 433MHz. -
Page 4: Name Of Parts
Name of Parts Display Power Pack: 13 07 MASK FREEZE t0.11/8920 92Ws 1. STD Recycle 6. Group (GR) 10 12 2. Radio Transmission Wireless Shooting 7. Modeling Lamp 3. Channel (CH) 8. Power Level 4. FREEZE Stable Color Temperature 9. Flash Duration 01. -
Page 5: Optional Accessories
Optional Accessories Operation CORE2400 power pack can be used in combination with the following Power On/Off option-al accessories so as to achieve best photography effects: Slide power switch to "-" to power on; CORE2400 Flash head, ST-IV, ST-III and ST-III+ flash trigger, PRO AC 2.4G Transmitter, softbox, beauty dish, umbrella, snoot, light Slide power switch to "o"... - Page 6 2.Percentage: 1%~100%(to prevent overheat, ＜45℃ the fan rotates in 5. Long press the modeling lamp and choose the percentage. Then, turn the select dial to adjust brightness from 1% to 100%. low speed while ＞45℃ in high speed). FREEZE FREEZE /128 /128 MULTI...
-
Page 7: 2.4G Wireless Mode
2.4G Wireless Mode MENU VER 0.7 COLOR FREEZE When choosing 2.4G wireless transmission, purchase ST-IV, ST-III or WIRELESS CHANNEL ST-III+ series flash triggers (optional) is needed. If there are other /128 SOCKET 1 GROUP wireless flash systems nearby, you can change the channel (CH), SOCKET 2 GROUP RECEIVER MODEL... -
Page 8: 433Mhz Wireless Mode
433MHz Wireless Mode Display Flash Duration When choosing 433MHz wireless MENU VER 0.7 transmission, purchase PRO AC Flash duration refers to the length of COLOR WIRELESS 433MHz remote control (optional) is time that from flash’ s firing to reach the CHANNEL needed. -
Page 9: Flash Mode-Multi: Stroboscopic Flash
Flash Mode-Multi: Stroboscopic Flash • Stroboscopic flash is most effective with a highly reflective subject With stroboscopic flash, a rapid series of flashes is fired. It can be used against a dark background. to capture multiple images of a moving subject in a single photograph. •... -
Page 10: Optic S2 Secondary Unit Setting
Setting Custom Functions MENU VER 0.7 MENU VER 0.7 COLOR COLOR FREEZE WIRELESS WIRELESS CHANNEL CHANNEL Press the< >button to enter menu. Turn the select dial to choose /128 SOCKET 1 GROUP SOCKET 1 GROUP SOCKET 2 GROUP SOCKET 2 GROUP custom functions. -
Page 11: Sync Triggering
camera hot shoe. Settings made on the hotshoe-mounted transmit and DELAY receive ends will be wirelessly communicated to the flash. Then you can 0.01~30s Can be set as press the camera shutter release button to trigger the flash. You can also second-curtain sync hold the transmit end at hand to control your off-camera flash.The Sync UNITES... -
Page 12: Technical Data
Single lamp holder 60W ● As the firmware upgrade needs the support of the G3 software, Receiver S1/S2 Secondary Unit Setting please download and install the "PIXAPRO G3 firmware upgrade Flash Duration Indication √ software" before upgrading. Then, choose the related firware file. - Page 13 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 14 If maintenance service is needed, you can directly contact the product distributor or lockingdevice, package, etc. authorized service institutions. You can also contact the PIXAPRO after-sale service PIXAPRO After-sale Service Call +44(0)121 552 3113 call and we will offer you service. When applying for maintenance service, you should provide valid warranty card.
Need help?
Do you have a question about the Core2400 Pro and is the answer not in the manual?
Questions and answers