Table of Contents
Advertisement
Quick Links
Manual of MX VTX-58XX PRO HVserial analog video
transmitters
MX VTX-58XX PRO HV serial analog video transmitters are newly designed for FPV flight, it can
satisfy our customers for its optimized multifunction: Support MX-SmartVTX protocol, support manually
timely controlled power (No need to enter set up menu of VTX to change VTX power during flight),
user-friendly installation way etc.
Features:
1) MX-SmartVTX protocol (Note 1);
2) Support PWM signal power control (for timely setting up VTX power manually);
3) LED light indicates VTX power timely;
4) Global commonly used 40CH frequencies;
5) 25MW output (Maximum 800MW, Note 2)
6) Its power will be 25MW when it enters power set up mode;
7) Hole installation position for version A: 30.5*30.5mm (also can be installed on 30.0*30.0mm)
8) Hole installation position for version B:20.0*20.0mm;
Note 1: MX-SmartVTX is a protocol connecting VTX and Flight control board, which is for setting up
working frequency and power on VTX in graphical way.
Note 2: The maximum power output will be different for different version;
Advertisement
Table of Contents
Summary of Contents for Oversky MX VTX-58 PRO HV Series
- Page 1 Manual of MX VTX-58XX PRO HVserial analog video transmitters MX VTX-58XX PRO HV serial analog video transmitters are newly designed for FPV flight, it can satisfy our customers for its optimized multifunction: Support MX-SmartVTX protocol, support manually timely controlled power (No need to enter set up menu of VTX to change VTX power during flight), user-friendly installation way etc.
- Page 2 Comparison table for 3 versions of video transmitter VTX-5808 PRO-A HV VTX-5804 PRO-A HV VTX-5805 PRO-B HV Input voltage 7.4~26.0V（2~6S） Output power 13DBm（25mW） 13DBm（25 mW） 13DBm（25 mW） 23DBm（200 mW *） 23DBm（200 mW *） 23DBm（200 mW *） 27DBm（500 mW *） 26DBm（400 mW *） 27DBm（500 mW *）...
- Page 3 button(SW), after red and blue LED flashes in turn for 5 times, VTX logs out of set up mode, the changed parameters are saved. Note: 1) The above operation should only be in 1),2),3),4) order. 2) The transmitting power will be 25mW automatically when VTX enters set up mode, and VTX will return to the already setup power when VTX exits set up mode.
- Page 4 OSD display through radio, it is a solution for connection between VTX and flight control board., which is very simple and direct way. For using this function, please connect RXD on VTX to TXD on UART3 or UART6 of flight control board first, turn on SmartAudio function on flight control board as the following: Then enter set up mode according to guided message on OSD, and enter set up menu for VTX, VTX will save the data automatically as soon as the setup is effective(red and blue LED flashes 6 times in turn).
- Page 5 Indication for VTX working frequency and power: LED flashing state indicates current working frequency when VTX is powered. Circulated flashing blue LED indicates the current transmitting power of VTX after VTX working frequency is indicated. ● Red and blue LED flashing state indicates the current working frequency of VTX at the time VTX is powered.
- Page 6 Band B 5733 5752 5771 5790 5809 5828 5847 5866 Band E 5705 5685 5665 5645 5885 5905 5925 5945 Airwave 5740 5760 5780 5800 5820 5840 5860 5880 Race 5658 5695 5732 5769 5806 5843 5880 5917 Power 25mW 200mW 500mW 800mW...
- Page 7 the manually power control function will be terminated, as a result, A0 functions GND. Manually power real time control: Manually power real time control is for adjusting transmitting power of VTX manually according to distance between transmitter and flying model, through which VTX can be less power consumption and less interference to other pilots at the scene.
Need help?
Do you have a question about the MX VTX-58 PRO HV Series and is the answer not in the manual?
Questions and answers