Twoey 8200 Assembly Instructions Manual

IMPORTANT. RETAIN FOR FUTURE REFERENCE. READ CAREFULLY
8200
CHANGING STATION
COMPLIES WITH BS EN 12221-1 2008 + A1:2013
Assembly Instructions.
Before assembling the unit and where necessary refer to the
enclosed Component List.
Additional Tools Required.
Maintenance.
Examine all fasteners periodically and retighten where necessary.
Care must be taken not to over tighten the fasteners.
Some residual dust from the manufacturing process may be apparent.
Your unit may be cleaned with a damp cloth.
Stubborn marks may be removed with a mild detergent or
Non-abrasive cream cleaner.
WARNING: "DO NOT LEAVE THE CHILD UNATTENDED"
Be aware of the risk of open fires and other sources of strong heat,
such as electric bar fires, gas fires, etc. in the near vicinity of the
changing unit.
Do not use the changing unit when any part is broken torn or
missing.
Any additional or replacement parts shall only be obtained from the
manufacturer or distributer.
Maximum size cot mattress 120cm x 60cm (not included)
Intended for use for children from birth to 21kg
This unit is designed for use indoors on a flat level surface.
8200 - Changing Station CS0657
Adults Required For Assembly.
Syke Road, Wigton. Cumbria CA7 9NS
Tel: 016973 49774/45300 Fax: 016973 45511
Registered Office: The Old Brewery, Caldbeck.
Manufactured by:
Mike Miller Associates Ltd.,
Email: info@twoey.co.uk
Website: www.twoeytoys.com
Registered in England No: 1425839
Cumbria CA7 8EW
20/01/2016