WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING! Read all safety warnings This appliance is not intended for use by and instructions. Use the 20V MAX persons (including children) with reduced Impact Wrench in accordance with these physical, sensory or mental capabilities, instructions, taking into account the or lack of experience and knowledge,...
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE Do not overload the tool. Do not apply designed for use with the unit. excessive pressure to the 20V MAX Do not operate the appliance if it has Impact Wrench. If the nuts cannot be been submerged in water or any other moved and the wrench freezes, cease liquid to prevent against electric shock,...
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE risk of electric shock. PROPOSITION 65 WARNING! This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm.
BATTERY CAPACITY INDICATOR When in use you can check the status of the 20V MAX 0-10% Charged Battery Pack by pressing the Charge Level Indicator Button (10). Pressing this will illuminate the 20V MAX Battery’s 10-25% Charged level of charge. 25-50% Charged 50-75% Charged 100% Charged...
SPECIFICATION CHARGE IMPACT BATTERY VOLTAGE ANVIL TIME RATE CAPACITY mins Amps 0-2700 20V MAX 1/2 in square 1. 1/2 Inch Anvil. 7. Belt Clip. 2. Direction Selector Switch. 8. 20V MAX Battery Pack. 3. Trigger. 9. Battery Indication Level (not shown). 4.
INSTALLING A SOCKET Always ensure the 20V MAX Battery Pack (8) is removed before attaching a socket to the tool. When installing a socket, align the holes in the side of the socket with the Anvil (1). Press the socket on until the Anvil engages in the hole.
ATTACHING THE BATTERY PACK Position the 20V MAX Battery Pack (8) at the base of the Handle (5) Slide the Battery Pack into the Battery Socket (4) ensuring it securely ‘clicks’ into position. NOTE: The Battery Pack (8) has raised ribs which ensures the Battery can only be inserted into the Impact Wrench one way.
Page 10
REMOVING LUG NUTS WARNING Do not go underneath your vehicle 4. Place a jack under the jacking point for the wheel to without Jack Stands. Jacks are not designed to be removed and raise the vehicle. maintain heavy loads for long periods of time. 5.
MAINTENANCE & CARE Handle the tool and accessories with care and keep Immediately wipe grease and oil-based grime off the tool and accessories with a slightly damp cloth. them clean to ensure an extended product life. Store idle power tools out of reach of children and Do not make any modifications to the tool.
DISPOSAL INFORMATION PRODUCT DISPOSAL INFORMATION For electrical products sold within the European Community, at the end of the electrical product’s useful life, it should not be disposed of with household waste. Please recycle where facilities exist. Contact your local authority for details of collection schemes in your area.
M3 7BF Declare under our sole responsibility that the product: SKU: 3500007 Description: VonHaus 20V MAX Impact Wrench To which this declaration relates is in conformity to: UL Std. 60745-1, 60745-2-2 3rd Ed., rev. March 15, 2011 Certified to CSA Std. C22.2 No.60745-1-07, 60745-2-2-04 2nd Ed., rev.
Page 14
Thank you for purchasing the 20V MAX Impact Wrench. VonHaus is a registered trademark of DOMU Brands Ltd ® Made in China for DOMU Brands Ltd M24 2RW.
Need help?
Do you have a question about the 3500007 and is the answer not in the manual?
Questions and answers