Page 1
LINK EXT40-4K 40M HDBaseT 4K @ 60Hz 4:2:0 HDMI Extender User Manual Version: V1.0.0...
Page 3
Important Safety Instructions 1. Do not expose this apparatus to 6. Clean this apparatus rain, moisture, dripping or only with dry cloth. splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 7. Unplug this apparatus 2.
Page 4
Warnings of FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Thank you for purchasing this product. For proper installation and optimum performance, please read the instructions in this manual carefully. LINK EXT40-4K is a slim transmitter receiver pair, which can extend HDMI 1080P@60Hz signals up to 70m/230ft and 4K@60Hz (chroma sub-sampling 4:2:0 8-bit only) signals up to 40m/130ft via a single Cat 6a/7 cable.
Specifications Technical Input/Output Signal Type HDMI with 4K@60Hz 4:2:0, HDCP 2.2 Up to 4096x2160@60Hz, including Input/Output Resolution 4K@60Hz/4K@30Hz/1080P/1080i/720P Supported Note: 4096x2160/3840x2160@50/60Hz is based on chroma sub-sampling 4:2:0 8-bit only. 4K: 8/10/12 bit Deep color 1080P: up to 16 bit Maximum Data Rate 10.2 Gbps Maximum Pixel Clock 340MHz...
Off: The device is not working properly. HDCP LED On: HDCP protected content is being transmitted. Blinking: Non-HDCP protected content is being transmitted. Off: No content is being transmitted. Link LED On: HDBT link is normal. Blinking/Off: No HDBT link or link error.
Page 9
Rear Panel Transmitter Receiver Name Description a & 1 DC 18V Connect to the power adapter. HDBT OUT Connect to the receiver via a Cat 5e/6/7 cable. c & 3 IR IN Connect to the IR receiver provided. d & 4 IR OUT Connect to the IR emitter provided.
Application Diagram TV remote Blu-ray Player HDMI IN IR Receiver 1 IR Emitter 2 Transmitter HDBT Receiver IR Receiver 2 HDMI OUT IR Emitter 1 Blu-ray Player remote Note: Connect the broadband IR receiver to IR IN and the IR emitter to IR OUT.
RS232 Operation RS232 ports can be used for bi-directional RS232 signal pass-through between the transmitter and receiver. RS232 Device RS232 cable Transmitter RS232 Port Connected RS232 Device Pins HDBT Receiver RS232 cable RS232 Device...
Troubleshooting 1. No Power Ensure the power is on. Ensure you use the power adapter provided in the package. 2. No Picture or Video Flash Ensure all devices are on, and all cables are qualified and connected properly. Ensure all the cables’ length are within the maximum distance (refer to Specification table).
Warranty Terms and Conditions For the following cases LINK shall charge for the service(s) claimed for the products if the product is still remediable and the warranty card becomes unenforceable or inapplicable. The original serial number (specified by LINK) labeled on the product has been removed, erased, replaced, defaced or is illegible.