Advertisement
1. Attach the green ground wire clamp to a known ground on the vehicle being serviced.
2. Place the suction/drain hose in the vehicle.
3. Rotate the pump handle briskly to obtain initial prime.
4. Rotate the handle clockwise (as shown by the arrow on the pump) to draw from the gas caddy , rotate counter-
clockwise for suction.
5. The gas caddy may also be filled by removing the fill cap and filling through the fill tube. DO NOT OVERFILL. Fuel
level must be below the flame arrestor screen under the fill tube.
For Service Assistance
Phone Toll Free 1-800-433-0708
Operation
®
30-Gallon
Gas Caddy
Model No. GG-30GC
Owners Manual
Rev 10/15
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for GAS & GO GG-30GC
- Page 1 5. The gas caddy may also be filled by removing the fill cap and filling through the fill tube. DO NOT OVERFILL. Fuel level must be below the flame arrestor screen under the fill tube. Model No. GG-30GC Owners Manual...
- Page 2 Transmission Fluid) on the front of the gas caddy. Fig 5 Do Not Transport With Pump Attached Secure Gas Caddy During Transportation Capacity: 30 U.S. Gallons Manufactured by and as; JohnDow Industries, Inc., Barberton, Ohio Model Number: GG-30GC Fig 6 Fig 7 Fig 8...
Need help?
Do you have a question about the GG-30GC and is the answer not in the manual?
Questions and answers