MOONRAYS 26245 Assembly Instructions

Solar pathway lights

Solar Pathway

Lights

model no. 26245, 26272

Assembly Instructions

IMPORTANT: Please read this manual carefully

before beginning assembly of this product.

Keep this manual for future reference.

Overview

This product is designed to the highest technical specifications and standards. It will supply years of maintenance-free use.

Please read these instructions thoroughly prior to installation, then store in a safe place for future reference.

About Your Solar Light

During the day your solar panel will convert the sun's light and/or UV rays into electrical power that will charge the rechargeable

battery. When it becomes dark, the solar light will turn on using the power stored in the rechargeable battery as it will detect no

daylight. The unit's light output strength and duration depends on how many hours and how much sunlight and/or UV rays your

panel absorbs throughout the day.

For maximum output place the solar panel in an area where there is direct sunlight for at least 8 hours in a given day. Do not

install your solar light in a shaded area. The selected location should not be near nighttime light sources such as porch lights,

street lights or pool lights, as these may cause the solar light to turn off prematurely.

Table of Contents

Need help?

Do you have a question about the 26245 and is the answer not in the manual?

Page 1 Solar Pathway Lights model no. 26245, 26272 Assembly Instructions IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. Overview This product is designed to the highest technical specifications and standards. It will supply years of maintenance-free use.
Page 2 Getting Started Please do not throw away any packing material until all parts are verified as present. Important • Fully charge the battery before first use. • For best results, locate your solar lamp in a position where it can get direct sunlight on the solar panel and is generally free from cover and shade.
Page 3 Assembly & Operation For First Time Use: Step 1: Insert the pole over the base of the lamp head until secure. Step 2: Insert the ground stake into the pole with the spiked end facing downward. Step 3: Carefully remove the top by turning it in a counter-clockwise direction until it separates from the lens.
Page 4 This product is covered under a one year limited warranty. Fusion Products Ltd. warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from date of purchase. MOONRAYS® is a registered trademark of Fusion Products Ltd. For Technical Support and/or Warranty inquiries please contact: Fusion Products Ltd.

26272