TMG SD03-1036 Instruction Manual

TMG SD03-1036 Instruction Manual

Advertisement

Quick Links

3.6V
CORDLESS SCREWDRIVER
SD03-1036

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SD03-1036 and is the answer not in the manual?

Questions and answers

Summary of Contents for TMG SD03-1036

  • Page 1 3.6V CORDLESS SCREWDRIVER SD03-1036...
  • Page 3: Safety Information

    2. Electrical safety Important! a) The connector plug from this electric tool When using equipment, a few safety precautions never be altered in any way. Never use adapter must be observed to avoid injuries and damage. plugs together with earthed electric Please read the complete operating manual with due care.
  • Page 4 and always wear safety goggles. Wearing personal protection (such as dust masks, repaired. non-slip safety shoes, safety helmet or ear c) Pull the plug out of the socket and/or protection, depending upon the type and use remove the battery before making any of the electric tool) reduces the risk of injury.
  • Page 5 Description of symbols A charger that is designed for a certain type other types of battery. Pay attention to all the signs and symbols shown in these instructions and on your tool. c) Use only the correct batteries in the electric Make a note of these signs and symbols.
  • Page 6: Technical Data

    2. Layout Sound and vibration values were measured in accordance with EN 60745. 1. Bit chuck sound pressure level 57.5 dB(A) 2. Lamp uncertainty 3 dB 3. Locking button sound power level 68.5 dB (A) 4. Battery capacity indicator uncertainty 3 dB 5.
  • Page 7 discharge. screwdriver from being switched on An integrated protective circuit automatically inadvertently. You can select between clockwise and counterclockwise rotation. Change the direction of rotation only when the equipment is at a Warning! Do not press the ON/OFF switch any standstill.
  • Page 8: Disposal And Recycling

    8. Disposal and recycling The yellow and red LED illuminate: The battery has an adequate remaining charge. The unit is supplied in packaging to Red LED: prevent its being damaged in transit. The battery is empty, recharge the battery. This packaging is raw material and can therefore be reused or can be returned to the raw material system.

Table of Contents