TechniSat DVB-S2 Instruction Manual
  1. Manuals
  2. Brands
  3. TechniSat Manuals
  4. Computer Hardware
  5. DVB-S2
  6. Instruction manual

TechniSat DVB-S2 Instruction Manual

Base unit & ip ird-cards
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
EN
TechniSat
TechniNet
Base Unit &
IP IRD-Cards
DVB-S2
DVB-C
DVB-T
www.technisat.de
www.technisat.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVB-S2 and is the answer not in the manual?

Questions and answers

Summary of Contents for TechniSat DVB-S2

  • Page 1 Instruction Manual TechniSat TechniNet Base Unit & IP IRD-Cards DVB-S2 DVB-C DVB-T www.technisat.de www.technisat.com...

  • Page 2: Table Of Contents

    4.3.5 Factory settings ............................. 21 4.3.6 TS/IP Interface .............................. 21 4.3.7 HTTP Login..............................22 Main Menu, Inputs ............................23 4.4.1 DVB-S2 reception ............................23 4.4.2 DVB-C reception ............................25 4.4.3 DVB-T reception ............................26 4.4.4 Multicast-reception ............................. 27 4.4.5 Monitoring of the RSSI Data ........................29 4.4.6...
  • Page 3 General ................................56 Artikel No. Description This manual is describing the following pages: 0000/5972 TechniNet IP DVB-S2/IP DVB-S2 IRD-Card (x6 Multicast Channels) TechniNet IP DVB-C/IP DVB-C IRD-Card (x6 Multicast Channels) 0000/5975 TechniNet IP DVB-T/IP DVB-T IRD-Card (x6 Multicast Channels) 0000/5976...

  • Page 4: Safety Advice

    Safety advice For your own safety you should read this first and carefully – please pay attention to the All assembling and installations have to be carried out by professional staff. Professionals are given advice before you start operating the device. persons who have an extended knowledge in the area of Sat Equipment installations and are also familiar with the safety and emergency standards.
  • Page 5 > The set may only be opened by qualified professionals (dealership). > Repairs may only be carried out by qualified professionals (dealership), or the faulty set may be returned to TechniSat with a precise description of the fault(s). For your safety: >...

  • Page 6: Description

    General The TechniNet IP IRD cards receive a large number of channels of the DVB-S/S2, DVB-C or Description DVB-T signal and transmit those as IPTV or TSoIP via Ethernet 100BaseT interfaces in your IP based network. As network protocol UDP or RTP are used. The equipment is fitted with a TWIN-CI interface which can, with the aid of up to two CAMs, encrypt the channels directly through the card.

  • Page 7: Description Of The Operating Elements

    Description of the operating elements Front view Element Description RJ-45 socket, network connection, full-duplex TS/IP RJ-45 socket, TSoIP-connection, half - duplex, Input or output POWER LED, operational voltage display LOCK LED, Tuner lock display IP RST Button, IP Reset RESET Button, Card Reset Remote Control 15pol.

  • Page 8: Assembling

    Bringing into service During operation of the device the ESD-safeguards in accordance with DIN EN 100 ESD-safety 015-1 have to be observed. (Induced by a potential equalization between chassis and equipment material as well as housing materials through high resistance (approx.

  • Page 9: Handset

    The 15pol. D-Sub Connector should be used for the connection of the programmer unit 3.2.3 Handset (0000/5971) via cable. After assembling the module into the base unit such as described in Point 4.1 the SAT-ZF 3.2.4 TUNER IN connection has to be connected with the TUNER IN F- connector. The device is ready for reception immediately.

  • Page 10: Programming

    The configuration of the card is possible in three different ways: Programming 1. Programmer (art. No. 0000/5971) connected via cable 2. TMS - TechniNet Management Software 3. Web-Interface Details of operation of the TMS are available in the TMS manual.

  • Page 11: Programmer

    Nur vorhanden, wenn IP/TS Anschluss IP In:100M als Inputconfigured ist. IP in:Unlock Inputs Strength -37.0dBm RSSI -> C/N 15.2dB Eb_NO 12.2dB BER 0.0e-8 Inputs LNB Frequency DVB-S2 -> 10600MHz (nur 0000/5972) Satellite Frequency 11836MHz Symbol Rate 27000KBaud LNB Voltage LNB 22kHz DiSEqC DiSEqC Off...
  • Page 12 Main menu Inputs Constellation Inputs -> (nur 0000/5975) Frequency 442000KHz Symbol Rate 6900KBaud Inputs Frequency COFDM -> 474.000MHz (nur 0000/5976) Band Width Inputs Stream IP Addr Ethernet -> 10.10.111.1 Nur vorhanden, wenn IP/TS Anschluss als Inputconfigured ist. Stream Netmask 255.255.255.0 Stream Gateway 10.10.70.1 Stream Mac Address...
  • Page 13 Outputs Status PMT:200 PN:28722 Status -> Decoder OK-> A/V:202/201 Status CI Slot1 -> Status Ethernet -> Outputs CI Source -> TUNER CI Setup Free Setup -> T-EinsPlus Outputs Decoder Decoder -> Program Decoder Video Decoder Audio Decoder Biss Outputs ASI Source ->...
  • Page 14 Main menu Outputs Output Stream IP Addr Ethernet -> 10.10.70.43 Nur vorhanden, wenn IP/TS Anschluss als Ausgang configured ist. Stream Netmask 255.255.255.0 Stream Gateway 10.10.70.1 Stream Mac Address 00:06:f4:1f:0d:19 Gateway Mac Address ff:ff:ff:ff:ff:ff Protocol TS Pkts Per UDP Time To Live Type Of Service Normal Source...
  • Page 15 Main Menu Uni/Multicast Setup 0-Uni/Multicast ID Outputs -> 238.1.1.1 0-Uni/Multicast Port 1234 0-Destination Mac address 0-Switch 0-Program T-EinsExtra 0-EIT Pass Through 0-TDT/TOT Pass Throu Main Menu Main Menu System -> System System IP Address Local Setup -> 10.10.110.101 Network Mask 255.255.255.0 Gateway 10.10.110.1...
  • Page 16 Main menu System System Trap IP Addr Trap IP Addr -> 10.10.70.66 System Unit Name Unit Name -> DVB-S2 0000/5972 Main Version: System 14PR001A Properties -> Linux OS version:05 ARM S/W version:39 Decoder version:68 FPGA version:44 TS/IP Out NIOS:58 TS/IP Out FPGA:10...

  • Page 17: Connection Of The Programmer Remote Control

    For the local operation of the modules, the cable connected TechniNet IP Programmer will be Connection of the programmer Remote Control connected to the 15 pol. D-Sub-connector at the front panel of the module. It can only communicate with one module at one time. Picture: 2, Programmer 0000/5971 After the first connection of the programmer welcome does apply.

  • Page 18: Main Menu, System

    Main Menu, System Please configure your network settings of the LAN interface before you start working with 4.3.1 LAN Interface TechniNet Management Software (TMS). You are within the main menu, Section: System. Main Menu System -> ENTER   System Local Setup ->...

  • Page 19: Trap-Ip

    You can choose an individual name for the module (max. 20 digits). 4.3.3 Module name You are within the main menu, Section: System. Main Menu System -> ENTER   System Unit Name -> Please insert a name for the module. ENTER Unit Name DVB-S2 0000/5972   ENTER ENTER EXIT...

  • Page 20: Firmware Version

    Information on the firmware version can be requested here. 4.3.4 Firmware version You are within the main menu, Section: System.. Main Menu System -> ENTER   System Properties -> Main Version ENTER MAIN Version: 14PR0023 Linux- and ARM version ...

  • Page 21: Factory Settings

    Reset the module parameter back to the factory settings: 4.3.5 Factory settings You are within the main menu, Section: System. Main Menu System -> ENTER   System Factory Settings -> Factory settings ENTER Choose ENTER for YES or EXIT for NO. Factory Settings? ENTER=YES EXIT=NO...

  • Page 22: Http Login

    Login Data for using the web-interface can be configured here: (see chapter 4.6). 4.3.7 HTTP Login You are within the main menu, Section: System. Main Menu System -> ENTER   System HTTP Login -> Login ID ENTER HTTP Login Login ID Please insert a 8-digit Login ID.

  • Page 23: Main Menu, Inputs

    The menu is only available for the following products: Article no. Product name 0000/5972 TechniNet IP DVB-S2/IP DVB-S2 IRD-card (x6 Multicast channels) TechniNet IP DVB-S2/IP 32M DVB-S2 IRD-card (x32 Multicast 0000/5977 channels) You are within the main menu, Section: Inputs.
  • Page 24 auxiliary voltage multi switches Please choose the auxiliary voltage for the multi switch: LNB Voltage Vertical Low-Band   ENTER Horizontal Low-Band ENTER Control frequency multi switches  Please choose the control frequency for the multi switch. LNB 22kHz High-Band ...

  • Page 25: Dvb-C Reception

    In the following you can find the information for setting the reception parameters for the cable 4.4.2 DVB-C reception reception: The menu is only available for the following products: Article no. Product name TechniNet IP DVB-C/IP DVB-C IRD-card (x6 Multicast channels) 0000/5975 You are within the main menu, Section: Inputs.

  • Page 26: Dvb-T Reception

    In the following you can find the information for setting the reception parameters for the 4.4.3 DVB-T reception terrestrial reception: The menu is only available for the following products: Article no. Product name TechniNet IP DVB-T/IP DVB-T IRD-card (x6 Multicast channels) 0000/5976 You are within the main menu, Section: Inputs.

  • Page 27: Multicast-Reception

    The menu for the configuration for the Multicast reception is only available when the TS/IP 4.4.4 Multicast-reception interface as input is configured (External Board Type = IP In [see 4.3.6]). For configuring the basic settings for the process of transmission, following menu settings have to be set: You are within the main menu, Section: Inputs.
  • Page 28 Setting of the Multicast-Address Multicast IP Addr 225.0.0.1   ENTER ENTER Setting of UDP Port Multicast UDP Port 3000   ENTER ENTER Selection of the transmission protocol:  Protocol User Datagram Protocol Real-Time Transport Protocol   ENTER ENTER ...

  • Page 29: Monitoring Of The Rssi Data

    Here you can monitor the reception parameter: 4.4.5 Monitoring of the RSSI Data You are within the main menu, Section: Inputs. Main Menu Inputs -> ENTER   Inputs RSSI -> ENTER Strength = Input level in dBm   C/N = C/N Indicated value Strength -37.0dBm C/N 15.2dB...

  • Page 30: Main Menu, Outputs

    Main Menu, Outputs The menu to configure the TS/IP interface is only available in case of TS/IP interface is 4.5.1 TS/IP Interface configured configured as output (see 4.3.6). System > Optional Function > External Board Type = IP Out (see 4.3.6) You are within the main menu, •...
  • Page 31 Request of the MAC Address of the TS/IP Interface Stream Mac Address 00:06:f4:1f:0d:19   ENTER ENTER Input of the MAC Address of the Gateways for  the network, to which the TS/IP interface is connected Gateway Mac Address ff:ff:ff:ff:ff:ff ...
  • Page 32 Maximising of Through put Minimizing of Throughput deferment Min Delay Selection of data source Source Tuner TUNER ASI input TUNER   ENTER CI Interface ASI Input CI De-encrypted ENTER Selection of play out process via the TS/IP  interface Mode SPTS play out IPTV...

  • Page 33: Uni-/Multicast Play Out

    The data transmission can be Unicast or Multicast. 4.5.1.1 Uni-/Multicast play out In case of unicast-transmission the data will be transferred from one point to one receptor. Unicast In case of Multicast transmission, the data will be transferred from many points to many Multicast receptors simultaneously, without multiplying the data volume by the number of receptors.
  • Page 34 Set the transmission parameter for a channel. Chose a channel Channel 0 -> ENTER  Channel x -> Set of the Uni/Multicast-Address ENTER In case of Multicast-transmission we suggest using the following range of address: 0-Uni/Multicast ID (see also RFC5771): 238.1.1.1 225.x.x.x up to 232.x.x.x ...
  • Page 35 Selection of the service transmitted 0-Program T-EinsExtra   ENTER ENTER EIT play out  0-EIT Pass Through   ENTER ENTER  TDT/TOT play out 0-TDT/TOT Pass Throu   ENTER ENTER EXIT...
  • Page 36 In the DVB mode the complete transponder will be played-out via an address. (details see 4.5.1.1.2 DVB Mode (MPTS) 2.1.2). For this the following settings in the menu need to be done: System > Optional Function > External Board Type = IP Out (see 4.3.6) Outputs >...

  • Page 37: Web-Interface

    For programming the card via the web-interface, please open the web browser and insert the Web-Interface IP-address of the corresponding card. Our sample is as follows: http://10.10.110.201 You will be asked for a Login ID and a password, which you set with the Programmer (details see 4.3.7).
  • Page 38 Eb/No Indicated value (Energy per Bit relating to signal/noise ratio Eb/No(dB) frequency.) With decreasing Eb/No, the Bit failure rate increases. Input level Strength DVB-S, DVB-S2 in dBm DVB-C, DVB-T in dBµV Packet Size Frame length in the transport stream, BER post Viterbi; Bit failure rate behind the Viterbi-correction.

  • Page 39: Input

    Depending on the type of card, the tuner is available for different transmission standards. 4.6.2 Input In the section Input you can the configure parameter of the DVB-S/S2 - Tuner. 4.6.2.1 DVB-S2 Picture: 4 Input of local oscillator Input Description...

  • Page 40: Dvb-C

    Save the value with a click to the Apply button. In the section Input you can the configure parameter of the DVB-C-Tuner. 4.6.2.2 DVB-C Picture: 5 Selection of the Modulation 16-, 32-, 64-, 128- oder 256- QAM Setting Description value QAM Constellation process Cable Frequency (kHz)

  • Page 41: Dvb-T

    In the section Input you can the configure parameter of the DVB-T-Tuner. 4.6.2.3 DVB-T Picture: 6 Terr Frequency 174…230 MHz (VHF) COFDM Setting Description value Input frequency in kHz (kHz) 470…862 MHz (UHF) Band Width Selection of the channel band with 6, 7, 8 MHz The tuner detects the other parameters of transmission automatically.

  • Page 42: Asi2/Sdi Output

    ASI, Tuner, CI ASI Output Description value Source Selection of data source Descramble Selection of Bytes per TS-Packet (MPEG-2 Transport Stream Packet Size(Byte) 188, 204, Bypass [ISO/IEC13818-2] DVB-ASI format = 188 byte per TS-Packet) Save the value with a click to the Apply button. The output can be configured as ASI or SDI.

  • Page 43: Decoder Play

    Audio DID Selection of audio group 1, 2, 3 or 4. Group 1 to Group 4 SDI Output Description value Group 1 designates audio channels 1-4, None, One, Two, Emb Audios Group 2 is 5-8, Group 3 is 9-12 and One &...

  • Page 44: Decoder Config

    In the section Decoder Config you are able to configure parameter of the program to decode. 4.6.3.4 Decoder Config Picture: 10...
  • Page 45 Activation of the biss descrambling Biss Info Description value Biss Mode off, 1, E systems Video Standard Video Standard Auto, PAL, SECAM, NTSC Video Output Description value Screen Sett of the picture format 4:3 Letterbox, 4:3, 16:9 DVB Subtitle Available languages eng, ger, etc.
  • Page 46 Within the Section CI you can choose the programs to encrypt (CAM needed).With a CAM and 4.6.4 CI the appropriate Smartcard, depending on the CAM as well as the Smartcard, at least one channel can be decrypted, Picture: 11 You can choose the tuner of the ASI for setting the signal source for the transport stream you CI source want to receive.

  • Page 47: Ip In/Out

    In the section IP In/Out you can configure the TS/IP Interface. 4.6.5 IP In/Out Picture: 12 ASI, Tuner, CI IP Output Description value Source Selection of data source Descramble Number of MPEG packages which are TS Pkts Per UDP 1 to 7 bundled in an Standard Ethernet Frame Protocol Selection of the transmission protocols...

  • Page 48: Uni-/Multicast Play Out

    TOS is used for priorizing IP – data Normal, MIN DELAY, IP Output Description value packages MAX THROUPUT, MAX Type of Service RELIABILITY, MIN MONATARY COST Selecition of the playout mode: DVB MODE (MPTS) or IPTV (SPTS). After Mode DVB, IPTV click to the button Uni/Multicast Setup the setup window is opening.
  • Page 49 Choosing this configuration, the card plays out the full received DVB-data stream via the TS/IP 4.6.5.1.1 DVB Mode (MPTS) interface (TSoIP). The complete stream has a Multi-/Unicast IP-Address integrated and is played out in approx live mode into the network (sample: udp://225.1.1.1:3000). A MPTS hosts a variety of SPTS, all PSI- and SI-tables.
  • Page 50 Picture: 14 Channel Number Selection of the IP TV channel 1-6 or 1-32. IP Mode Setting description Multi-/Unicast IP Multi-/Unicast IP Address Multicast UDP Mulicast UDP-Port Nummer Port Destination MAC Destination MAC Address in Unicast Mode. Address Save the value with a click to the Apply button.

  • Page 51: System

    In the section System you can configure System Information. 4.6.6 System...
  • Page 52 Picture: 15 This window offers general information on the card. Device Info Unit Name: you can dedicate a name to the card. Save the value with a click to the Apply button. Serial Number: Display of the serial number of the Card This window shows the software version.
  • Page 53 TS/IP is switched off Filter Function No Exist Save the value with a click to the Apply button. Machine Type Change the Login Data for the web interface Login Please insert your 8 digit Login ID Login Description Login_ID You can use CAPS and SMALL Caps as well as digits Please insert your 8 digit Login password Login_password You can use CAPS and SMALL Caps as well as digit.

  • Page 54: Input

    Symbol rates 5…45 MBaud for QPSK 10…31 MBaud for 8PSK FEC Code rate DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 Frequency range 48…860 MHz Tuner DVB-C / EN 300 429 Input level 45…75 dBµV...

  • Page 55: Output

    Channel bandwidth 6, 7, 8 MHz FFT mode 2k, 8k Guard interval ∆/T 1/4, 1/8, 1/16, 1/32 1/2, 2/3, 3/4, 5/6, 7/8 Interface BNC jack, 75 ASI / EN 500 83-9 Data rate 100 MBit/s Ethernet RJ45 electrical, half duplex TSoIP Format 100BaseT, IGMPv2, UDP/RTP, unicast or multicast...

  • Page 56: General

    Cable based D-Sub 15 high density Power consumption General Nonimal temperature range 0…45°C...
  • Page 57 Subject to changes and printing errors. Status 2/11 Reproduction and copies are only allowed with the consent of the publisher. TechniSat is a registered trademark of TechniSat Digital GmbH · P.O. Box 560 · 54541 Daun · Germany · www.technisat.com...

This manual is also suitable for:

Dvb-cDvb-t

Table of Contents