Advertisement
Using Your Product
¥ To switch on, move the On/Off switch to the on position.
¥ There are 10 seconds are record time available.
¥ To make a recording press and release the black button on the top, the LED will light
red to indicate recording has started and a single beep will sound.
¥ When you have finished the recording press the black button again, the LED will go out
and a double beep will sound.
¥ When the robot moves within approximately 5cm in front of the sensor, it will activate
the sensor to play back the recording.
¥ Once the sensor has been activated, it cannot be activated again for 10 seconds.
Battery Precautions
¥ This product is powered by 3 x AAA batteries (not included).
¥ Batteries are to be inserted with the correct polarity.
¥ The supply terminals are not to be short circuited.
¥ Only batteries of equal size and type should be used.
¥ Non-rechargeable batteries are not to be recharged.
¥ Rechargeable batteries are only to be charged under adult supervision.
¥ Rechargeable batteries are to be removed from the toy before being charged.
Replacing Batteries
¥ Remove the battery hatch cover and carefully remove the batteries and dispose of
them responsibly.
¥ Insert new batteries, ensuring the correct polarity. Replace the battery hatch firmly and
accordingly.
¥ Different types of batteries or new and used batteries are not to be mixed.
¥ Exhausted batteries are to be removed from the toy.
Robot Sensor
Advertisement
