Page 1
Water thermostat TW-2.03 User manual ELMI Ltd. 21-133 Aizkraukles Str. Riga, LV-1006, Latvia T.: +371 67558743 T.: +371 67551934 info@elmi-tech.com W: www.elmi-tech.com...
Page 3
Page Contents ........................... 1 Introduction ..........................2 Technical specifications......................2 Delivery package ........................2 Preparation to work........................3 Control description ........................3 Operation ..........................3 Troubleshooting ........................4 Safety features......................... 5 Disinfection and cleaning ......................5 Transportation and storage ...................... 5 Warranty statements.
Page 4
Water bath TW-2.03 is composed of the plastic water tank with the transparent lid and control block. The control block has LED displays and control buttons on top. Control block should be placed on the water tank and fixed with screw.
Page 5
Preparation to work 1) Unpack the device. 2) Inspect all parts of the water thermostat for damage. 3) Put device on horizontal solid surface. 4) Connect the control block to the tank by fixing the screw in the back. 5) Fill the reservoir with 6 liters minimum of distilled water (do not use any electrolyte solvents). 6) Plug the cord into the outlet with voltage of 220 V and frequency of 50 Hz.
Page 6
Error code table Error Cause Solution No display. No main power connection. Plug in power cord. Power failure. Check the voltage in network. ERR-1 Failure of temperature sensor. Replace the temperature sensor. ERR-2 Failure of water pump. Replace the water pump. LEVEL Insufficient water level.
Page 7
Safety features Service personnel are prohibited to: • Plug the device in to a power outlet that differs from the specified configuration. • Use the device with damaged power cord, water tank, control block. • Move the device during work. ATTENTION! Studied Samples may contain pathological material, including pathogens of serious diseases.
Page 8
Certificate of approval Water thermostat TW-2.03 has been inspected for the technical conditions and meets all regulations necessary for such class of device. Quality control person (name) (signature) Date of manufacture Place for stamp. Certificate of sale Organization Address Phone...
Need help?
Do you have a question about the TW-2.03 and is the answer not in the manual?
Questions and answers