Page 1
AIR or WAZA-AIR. After the connection indicator changes from flash to solid, it means that successfully connected. After the connection is established, you can turn on the Bluetooth of your smart device. If you need to use AIRSTEP BW Edition and the BTS App together, please check the related chapter below.
Page 2
Control FS A FS B FS C FS D FS E Modes 1. CH - / 2. 1. CH + / 2. Mode 2 BOOSTER DELAY2 PANEL PANEL 1. REVERB & 1. BOOSTER / 2. 1. MOD / 2. 1. FX / 2. CH A 1.
Page 3
3. Enter the BTS App, and pair AIRSTEP BW Edition in the “Bluetooth MIDI Device”, then choose AIRSTEP BW Edition in “CONNECT”, click “OK”. for the method of using AIRSTEP BW Editon and the BTS App together, you only need to connect AIRSTEP BW Edition in...
Page 4
App as the second step. Note: Although AIRSTEP BW Edition can be paired with the smart device, it is not supported by AIRSTEP App. You can pair AIRSTEP BW Edition in the AIRSTEP App, however, AIRSTEP BW Edition won’t respond to any editing.
Page 5
Charging: Use the USB charging cable in the accessory or the 9v standard pedal power. Upgrade Firmware Mode: Hold FS D and turn on the power.