Page 1
Make sure that the stimulator is switched off before charging, otherwise it will not be charge. THE RED LIGHT ON THE TOP RIGHT CORNER Set control button on MIN (0). NO RESPONSE FROM THE STIMULATOR Check fuse on the back pannel. TENSIOMYOGRAPHY ADDITIONAL RESOURCES AND SUPPORT info@tmg.si...
Page 2
In case the message »No Response From Device« appears, make sure the stimulator is connected and turned on. Check if the COM port is set in the settings menu. If the port reads test, press scan to set actual port. TENSIOMYOGRAPHY ADDITIONAL RESOURCES AND SUPPORT info@tmg.si...
Need help?
Do you have a question about the TMG-S2 and is the answer not in the manual?
Questions and answers