Ensure you have received everything on the supplied checklist. If not, contact support@survey-lab.com. Put your ike on charge for at least 4 hours prior to use to ensure that ike is fully charged. STARTING UP AND USING YOUR To turn on ike push the power button...
Page 3
TURNING THE GPS ON Before ike can capture an image, the GPS must be activated. icon to show GPS satellites. to turn GPS on. You will know you are getting a positive GPS location when your GPS cursor looks like this:...
Page 4
USING THE GPS IN THE DATA CAPTURE APPLICATION (DCA) GPS fix status appears directly below the image. Sometimes you have to wait for the GPS to get a reading. Initially, red text will appear: GPS: Fix not available Once a fix is available, green text will appear: GPS: PDOP: 2.1 (PDOP indicates the quality of a GPS fix, the lower the number the more accurate the position, i.e.
Page 5
Enter image label and comments in the display fields: to save the data. ike will return to the ArcPad screen where you simply push to start to capture another point. Further information is available in the ike user manual.
Page 7
LASER DISTANCE METER: Measures the distance to the target. INCLINOMETER: Measures the pitch and roll. This means that ike can be reliably used as a hand-held device, and does not need a tripod. DIGITAL CAMERA: A picture tells more than a thousand words.
Page 8
(To close ArcPad tap To transfer data between ike and your PC, you will need to connect ike to your PC using the USB cable provided. See the next page for cable connecting instructions.
When capturing data, ensure you are standing in a location with the clearest view of sky. This will allow a good GPS fix. Always keep ike on charge when not in use. Recharge your ike in the car using the car charger provided.
Need help?
Do you have a question about the 304 and is the answer not in the manual?
Questions and answers