Table of Contents
Related Manuals for Sparex S.143671
Summary of Contents for Sparex S.143671
- Page 1 Pairing steps for multi-monitor system 1. Please prepare 2 tools in advance 1) A cross screwdriver, use to remove and install the screw on camera 2) A thin rod ,use to press the paring key. You can use a toothpick. 2.
- Page 2 3. Remove the screw from camera. Keep the screw, you will need it later. 4. Choose the monitor which need to pair. Enter the menu, choose the icon, press ,then the monitor start to count. 5. During the counting, press the pairing key on camera. Pairing key is under the screw you just removed.
- Page 3 Note: For this system, you will find the monitors show RX1, RX2, RX3, RX4 . When pairing, this letters shows up in turns. For example,If you already get a RX1 in this system, now you pairing a second monitor to this system, the second monitor will show RX2, if you pair the second monitor again, now it becomes RX3, and if you pair the second monitor third time, the monitor shows RX4.
Need help?
Do you have a question about the S.143671 and is the answer not in the manual?
Questions and answers