About The Controls On The Air Conditioner - GE AGW12AK Owner's Manual And Installation Instructions

About the controls on the air conditioner.

Features and appearance may vary.
Fan
Only on
Controls
ON/OFF Pad
Turns air conditioner on and off.
Increase
Use to set temperature when in Cool mode.
Mode
Use to set the air conditioner to Cool or
Fan mode.
Fan Speed Pad
Use to set the fan speed to LOW (F1),
MED (F2) or HIGH (F3).
Power Outage Recovery Feature
In the case of a power outage or interruption, the
unit will automatically re-start in the settings last
used after the power is restored. If the Timer
Do Not Operate in Freezing Outdoor Conditions
This cool-only air conditioner was not designed for
freezing outdoor conditions. It must not be used in
freezing outdoor conditions.
Remote Control
I
To ensure proper operation, aim the remote
control at the signal receiver on the air
conditioner.
I
The remote control signal has a range of
4
up to 20 feet.
Timer on
Cool on
Air Conditioner Controls
L M
/Decrease Pads
Remote Control
Timer Pad
ON—When the air conditioner is off,
it can be set to automatically come on in
1 to 12 hours at its previous setting. Each
touch will set the timer in hours.
OFF—When the air conditioner is on,
it can be set to automatically turn off in
1 to 12 hours. Each touch will set the timer
in hours.
To cancel the timer, press the Timer pad
until the display time disappears.
Remote Control Signal Receiver
Display
Shows the set temperature or time remaining
on timer.
feature was set, it will resume its countdown.
You may need to set a new time if desired.
I
Make sure nothing is between the air conditioner
and the remote control that could block the
signal.
I
Make sure batteries are fresh and installed
correctly as indicated on the remote control.