Safety Information Warning! • Consult your healthcare professional prior to beginning any new routine of strenuous exercise. • Stop using this device if you experience dizziness, nausea, chest pain, or any other discomfort during training. • Only one person may use this product at a time. •...
Parts Diagram Control Panel Emergency Stop Clip Heart Rate Monitor Adjustment Knobs Locking Knob Supports M8×50 Bolt & Curved Washer Motor Running Belt Side Rails Power Cord Power Switch Support Column End Caps Knob Wheels M8×20 Bolt & M8×20 Bolt & Flat Washer Curved Washer...
Page 5
Assembly Step 1. Remove the locking knob and support column knob and unfold the treadmill. Step 2. Affix the treadmill in its upright position using appropriate bolts & washers. M8×20 Bolt & Curved Washer M8×20 Bolt & Flat Washer...
Page 6
Step 3. Affix the control panel to the upright tubes with the appropriate bolts & washers. Cover the bolts with the handle covers. M8×50 Bolt & Curved Washer Step 4. Reinstall the column support and locking knobs as shown.
Step 5. Attach the emergency stop clip to its slot. If desired, adjust the angle of the control panel using the adjustment knobs in the back. Loosen them, make your adjustment, and retighten. Operation Starts the treadmill Sets Time, Distance, and Caloric Goals Stops the treadmill Selects preset running programs Adjusts the treadmill's running speed in 0.1 km/h increments...
Page 8
For your safety, the treadmill will not operate without its emergency stop clip. Attach one end to the control panel and the other to any part of your clothing. When you press START, the treadmill will count down for 5 seconds and then begin moving at 1 km/h (0.6 mph).
Page 9
Adjustment Height Adjustment The treadmill’s height can be adjusted using the provided height pins as shown below. Medium High Folding To fold the treadmill for transport or storage, remove the column support knob and lift the running platform. Fasten the platform and the supports together using the locking knob. To unfold the treadmill, reverse this process.
Maintenance • Ensure that the running belt is centered before and after every use. • Periodically clean this product with a soft wet cloth. Do not use harsh chemicals. Allow to dry completely before use. • Periodically visually inspect moving parts for wear and tear. Repair or replace any that are found before further use.
To connect the treadmill to a training APP, scan the below QR code & connect to the Running V3 bluetooth address. Contact Us Thank you for choosing our treadmill! If you have any questions or comments, contact us at help@cs-supportpro.com and we'll resolve your issue ASAP!
Need help?
Do you have a question about the TRM-3600 and is the answer not in the manual?
Questions and answers