Table of Contents Getting to Know Your Camera............1 Charging the Battery.............1 Component Introduction............2 Inserting an SD Card............4 Installing the Battery............. 5 Installing Teleconverter............6 Getting Started.................6 Mode Menu................6 Date Settings................. 7 Video Mode................9 Photo Mode................11 Play Back................14 Slide Show................
Getting to Know Your Camera Charging the Battery 1.Take out the USB cable and connect with camera. 2.Plug the charger into a 100-240V power socket. 3.The camera charging indicator is always on during charging and the charging indicator is off when the camera is fully charged.
Component Introduction ② ④ ⑤ ③ ① ⑥ ⑦ ⑧ ⑬ ⑫ ⑪ ⑩ ⑨ For the function description of the related parts in the above figure, please refer to the following table. Name Function description Screen preview and video/photo IPS Panel ①...
Page 5
when choosing functions In photo mode, press to take photo. ⑤ Photo Button It also can be "OK" button when confirming functions Charging indicator and working ⑥ Status Light indicator. 1.Recording/stop video. ⑦ Recording Button 2.Stop playback when the video is Playing MIC: Access to an external microphone;...
Inserting SD Card 1.Open the Battery cover. 2.Insert SD memory card in the direction shown 3.Close the Battery cover. ※Open the Battery cover and press the memory card. Note: 1.The camera supports up to 128G SD card. It is recommended to use U1 high speed memory card.
Inserting the Battery 1.Open the Battery cover. 2.inserts a lithium battery. 3.Close the battery cover. Note: 1.Do not violently open the battery cover and remove the battery. 2.The battery needs to be loaded into the battery compartment in a correct direction.
Inserting Teleconverter 1.Take out the teleconverter and remove the protection cover on both sides. 2.Screw the teleconverter with the camera lens Getting Started Mode Menu 1.Open the screen or press the "POWER" button to turn on the camera. 2.On the standby interface, press the "MODE" button to enter the following options.
3.Press “T/W” zoom button to choose mode options,press "Photo" button to confirm selecting Note: The default boot mode is video mode. Date settings 1.Open the screen or press the "POWER" button to turn on the camera. 2.Press "MODE" button to select “Date” 3.Press "T/W "...
Page 10
5. Select the date and time by pressing "T/W " button and pressing "Photo" button to confirm selecting. 6. After setting the date, press "MODE" button to return to mode menu interface.
Video Mode Inserted SD card Current mode Remaining recording time Current Date Battery 1.Open the screen or press the "POWER" button to start video mode Or selecting Video by pressing "Mode" button. 2.Press the "Recording" button to start recording. 3.During the recording process, you can pause the recording by pressing the "Photo"...
Page 12
Video Setting Mode Pressing "MENU" button to choose different video settings Name Function Description Auto,Daylight,Cloudy,Fluorescent, Tungsten Color Standard,Sepia,Monochrome,Vivid Exposure +3、+2、+1、0、-1、-2、-3。 Metering Multi、Center、Spot。 Select:Off、1 Second、3 Seconds、 5 Seconds. After turning on this Time lapse function, you can compress several minutes and hours of video into a short video.
Photo Mode Inserted SD Card Current Resolution Residual Quantity of Photos Current Mode Battery Current Date 1.Open the screen or press "POWER" button to turn on the camera, and press the "Mode" button to select "Camera"...
Page 14
2.Press "T/W " zoom button and press " Photo " button to confirm the selecting. 3. Press lightly "Photo" button to adjust focus, and press "Photo" button to take photos. Photo Setting Mode Pressing "MENU" button to choose different photo settings...
Page 15
Name Function Description 24M/20M/16M/12M/10M/7MHD/5M/3M Resolution /2MHD/VGA Capture Off / 2S Timer / 5S Timer / 10S Timer Mode Anti-Shake On / Off Face Detect On / Off Marco On / Off Burst Mode Take three consecutive photos Auto/Daylight/Cloudy/Fluorescent/ Tungsten Color Standard/Sepia/Monochrome/Vivid Exposure +3/+2/+1/0/-1/-2/-3...
Play Back Video and photos are played quickly Play Resolution Quantity of Files File Type Preview duration Residual capacity 1.Open the screen or press "POWER" button to turn on the camera, and press the "Mode" button to enter the mode menu...
2.Press "T/W” zoom button and press " Photo” button to confirm and select playback. 3. Press "T/W” zoom button to preview the file. 4.Press " Photo” button to start/pause the video playback; press "T/W” zoom button to adjust the sound level; and press "Video"...
2.pressing the "MENU” Button , you can select 3S,5S,10S play time. 3.Press the "Photo” button to start/stop the slide show. Settings 1.Press “MODE” button to select “Setup”. 2.Press "T/W" zoom button to select and press "Photo” button to confirm selecting.
Name Function Description Language 13 Languages. Sound On / Off Auto Off Off/3mins/5mins/10mins. Normally, 60Hz is suitable for US or other Frequency countries. While 50 Hz is suitable for European countries and Japan and so on. Customize the date and time of the photo Set Date or video.
Troubleshooting Trouble Possible reason Solution Cannot Battery is not inserted Insert battery power on correctly/dead correctly/Charge Shooting in Unclear Out of focus range / focus able Focus lens dirty range/Clean the lens Unable to Replace the SD Card damage / SD use memory card / Format the card does not meet...
Need help?
Do you have a question about the AC7 and is the answer not in the manual?
Questions and answers