ELECTRICAL AND POWER SOURCE RELATED
1.
This medical panel PC unit must operate on a power source as shown
on the specification label. If you are not sure what type of power
supply used in the area, consult your dealer or local power supplier.
2.
The power cords must not be damaged. Applied pressure, added heat,
and tugging may damage the power cord.
3.
The power cord must be routed properly when setup takes place. We
advise that this aspect measure is to prevent people from stepping on
the cords or while the unit is suspended to prevent flying objects from
getting tangled with the unit.
6
A228/A248/A228I/A248I User's manual