Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for komodo KDQNARMT12A
- Page 1 DOUBLE HEIGHT QUEEN AIR BED WITH 240V PUMP KDQNARMT12A...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Ensure to read all warnings and instructions in this user guide prior to first use. Failure to comply with the warnings and instructions provided herein may result in inaccurate results and/or damage to the air bed. Retain this user guide for future reference. WARNING: To reduce the risk of burns, fire, electric shock or injury: •... - Page 4 WARNING: This air bed is operated with an electrical air pump that is thermally protected. The pump does not contain parts that can be repaired or serviced. It may cause explosions or electric shock if the pump is disassembled. If you have any issues with the electrical pump upon arrival, please contact help.Kogan.com for assistance.
- Page 5 OVERVIEW INFLATE DEFLATE Air bed Control dial Valve cap Power cord Valve Power cord storage compartment Liner cap Air vent...
-
Page 6: Before First Use
BEFORE FIRST USE Remove the air bed from its packaging and unfold it so that the textured side is facing up. After removing the air bed from its packaging, leave it out in an open space. There may be a slight smell, which is normal and non-toxic. - Page 7 Turn the control dial clockwise until the marker points towards “INFLATE” to pump air into the air bed. INFLATE DEFLATE Notes: • After 5 minutes of continuous use, the air pump will start to generate heat. Allow the air pump to cool down for 30 minutes before resuming use. It is not recommended to run the air pump for longer than 5 minutes.
- Page 8 Lie on the air bed to test its firmness. If you wish to make further adjustments, the control dial can be turned clockwise to further inflate or turned anti-clockwise until the marker points towards “DEFLATE” to let air out of the air bed. Turn the control dial back to “OFF” after achieving the desired firmness level.
- Page 9 Apart from using the power cord and control dial, the air bed may be manually inflated/deflated. Manual inflation Open the valve cap and connect an air pump or hose (not included) into the valve. Turn on the air pump or hose and inflate to the desired firmness. Close the valve with the valve cap.
-
Page 10: Cleaning And Care
CLEANING & CARE • To clean the air bed, use a mild soap solution and water. • Do not use chemicals to clean the air bed. • If the air bed needs to be repaired, use common PVC repair glue and patches. SPECIFICATIONS Material Size... - Page 11 NOTES...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the KDQNARMT12A and is the answer not in the manual?
Questions and answers