KBC eCopper EERF1-LS1-T-IN-B Quick Start Manual

EoU Transmitter – 1 UTP with fly cable and 1 RJ45
Introduction
The KBC EERF1-LS1-T-IN-B is a fully ruggedized Ethernet over UTP transmitter.
This transmitter provides connectivity for one 10/100Mbps IEEE standard
electrical copper port over UTP cable. Power is supplied from one of the
headend receivers, EERF16-GN3-R-RX-B, EERF8-GN3-R-RX-B, EERF4-DN1-R-WN-
B or EERF1-LN1-R-MN-B Ethernet over UTP units through the UTP cable by
Power over Wire (PoW) technology. The transmitter provides PoE+ support.
Varying data rates are supported depending on cable distance and quality. The
plug-and-play design ensures ease of installation with no electrical adjustment
needed. LED indicators are provided to show the operational status of the
unit.
The Ethernet port of the transmitter includes a flying cable. Its size is suited
for fitting inside camera housings and where space is limited.
Features
•
802.3af/802.3at compliant
•
Power over Wire technology
•
UTP data rate >40Mbps (300m)
•
Based on cable quality, cable pairs used (1, 2 or 4 pairs) and voltage
applied to cable (48~57VDC) from headend, PoE and PoE+ are supported
by PoW up to 400m
•
Powered by PoW from EERF16-GN3-R-RX-B, EERF8-GN3-R-RX-B, EERF4-
DN1-R-WN-B or EERF1-LN1-R-MN-B headend
•
Complete protection design including surge and lightning protection
•
Unique PoW transmission protection design together with a 1, 4, 8 or 16
channel receiver at headend
Downloads
Full specifications, features and additional information can be found on the
KBC website: www.kbcnetworks.com.
QSG-EERF1-LS1-T-IN-B_Series-Rev2101
Copyright © KBC Networks 2021
Quick Start Guide
EERF1-LS1-T-IN-B
eCopper™
www.kbcnetworks.com