Setra Systems AIIR Watch Quick Start Manual

Setra AIIR Watch
The Setra AIIR Watch comes assembled and ready to use after removal of the packaging and screwing in the UV bulbs. The AIIR Watch unit
weighs 55 pounds and it is recommended that 2 people are used to remove the unit from the box. Follow this Quick Start Guide to prepare
AIIR Watch unit for use.
1. Open the box top and remove black foam insert on top of unit.
2. Grasp the unit while still in the polybag by the top, lift unit straight up and set the unit onto the floor. When placing the unit onto the floor,
be aware that the unit has 4 wheels at its base with 2 locking casters. Remember to bend with knees, not back.
3. Unfasten the top of the polybag and pull downward off of the unit. Lift the unit out of the polybag and set it on the floor.
4. Remove the black shipping foam from the two side inlet grills.
5. Top of the unit needs to be removed to dispose of the inner packaging. Unscrew and remove the four white thumbscrews from the outer
panel. Remove the top panel section by lifting it straight up off of the unit.
6. Remove the four white shipping blocks by sliding them towards the middle of the unit and lifting them up
Phone: (800) 257-3872 | Fax: (978) 264-0292 | www.setra.com
Quickstart Guide