NENKO Multi Memo Recording Disc Manual

1. Name of the product
Multi Memo Recording Disc
2. Product code
20361471
3. Colour
See image
4. Brief description
This recording disc can record and play back multiple messages via the built-in microphone and
speaker, with a total recording capacity of 6 minutes (360 seconds). Up to 60 voice messages can be
recorded, saved and then played back one by one using the forward and backward buttons.
5. In use
Activating Multi Memo Recording Disc
1. On the back of the Disc is an on/off button.
Recording message
1. Press the record button (red button) to record a message.
2. When the red light turns on, recording has started. You will also hear a "beep" sound once to
confirm that the recording has started.
3. Speak the desired recording clearly near the microphone, with a distance of about 15
centimetres.
4. Finished recording? Do not release the record button until the desired message has been
recorded. You will hear two beeps as confirmation.
5. It is possible to record for 360 seconds with this Recorder. In addition, up to 60 separate
messages can be recorded.
Play recorded message
1. Press the play button (black button) to play the last recorded message.
2. Press the play button again to stop the message.
Finding recorded messages
1. Press the "next" or "previous" button to find the desired recording. Repeat this until you have
found the desired message.
2. Do you want to go directly to the last recorded message? Press the "next" button for three
seconds.
3. Do you want to go directly to the first recorded message? Press the "previous" button for three
seconds.
Deleting a recorded message
1. Find the desired recording to delete.
2. Press the "delete" button (blue button) once to delete this message.
3. The red light will light up and you will hear a beep once. This is the confirmation that the
deletion was successful.