Summary of Contents for Tommee Tippee ZTD10XB-8016
Page 1
3 in 1 UV sterilizer dryer and storage INSTRUCTIONS FOR USE Please read and keep these instructions 522284 ZTD10XB-8016...
Page 2
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS FOR HOUSEHOLD USE ONLY These instructions can also be found at www.tommeetippee.com Keep this instruction sheet for future reference as it includes important information. WARNING To reduce the risk of fire, electric shock or injury. Do not leave equipment when plugged in.
Page 3
Always use on a flat heat resistant surface. Do not move appliance when in use. Use in a well ventilated area. Do not sterilize electrical components. Do not touch hot surfaces, allow to cool before handling. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
Page 4
USAGE Always use the sterilizer on a flat heat resistant surface and keep it away from inflammables and explosives. Place it at least 4 inches away from a wall. Do not let the cord hang over the edge of kitchen work surface or touch hot surfaces. Do not move the sterilizer when in use.
Page 5
• Place bottles facing upwards to help with the drying function. • Plug into the power, press the on/off button then select the function you wish to use – sterilize only, dry only, auto sterilize and dry or storage function. •...
Page 6
FUNCTIONS Sterilize only function Press this button once for 35 minutes sterilization and twice for 45 minutes sterilization. Drying only function Press this button once for 30 minutes drying, twice for 40 minutes drying and three times for 50 minutes. Auto mode Press this button to start a drying then sterilizing cycle for 60 minutes in total, drying only first for 25 minutes then sterilizsing and drying for 35 minutes.
Page 7
HOW TO REPLACE THE FILTER SCREEN Back of the sterilizer Sponge filter Door to filter 1. Open the filter screen at the back of the unit 2. Remove the old sponge filter 3. If you wish to re-use the sponge filters, then rinse the sponge in warm water and leave to air dry. 4.
Need help?
Do you have a question about the ZTD10XB-8016 and is the answer not in the manual?
Questions and answers