Advertisement
Example Installation
Speaker level input from a radio to RCA level output for an aftermarket amplifier is the most commonly used configuration for the
L.O.C.PRO ADVANCED. This will create RCA level outputs from a radio that only has speaker level outputs.
In the example below, the Positive(+) and Negative(-) wires of two speakers are "tapped" and connected to the SPEAKER SIGNAL
INPUTS of the LPA. The speakers will continue to play as normal. The REM OUT is connected to the amplifiers turn-on. When the
radio is turned on the LPA will automatically turn on the amplifier. Lastly, the RCA SIGNAL OUTPUTS from the LPA are connected
to the aftermarket amplifiers inputs.
SEEK
SEEK AM/FM DISC
AUX
RW
FF
OEM RADIO
1
2
3
4
5
6
SET
For more installation examples, tech tips and updates,
visit the L.O.C.PRO ADVANCED product pages on
Specifications
Model Number
Channels
Operating Voltage
Max Input Level (20kHΩ Load Setting)
Auto Turn On
Output Voltage MAX @ 13.8V
Turn On Trigger (DC-Offset)
Load Input Impedance
Output Impedance
Variable Gain Adjustment
Signal To Noise
THD+N
Input Sensitivity
Frequency Response
Current Draw (Max)
Low Pass Filter
Bass Boost
Clip Indicator
Remote Level Control
Chassis Type
Terminal Gauge
Technical Support |
Phone: 727-592-5991 | Email: support@aampglobal.com | Chat: PAC-Audio.com | IM-LPA2X REV. 031721
PAC-Audio.com
LPA-2.2
2 IN — 2 OUT
9V—16V
40V / 400W @ 4 Ohms
DC Offset / Remote
9.5V RMS
3V—7V
20Ω, 60Ω, 20KΩ
<120Ω
-28dB—+1dB
>110dBA @ 6.4V Output
< 0.01%
0.5V—40V
10Hz—20kHz
40mA
<250Hz
0dB to +12dB
YES
OPTIONAL (PN: LPA-REM)
Stamped Steel
18AWG / Screw Type
CHASSIS GROUND (-)
12V CONSTANT POWER (+)
REMOTE AMP TURN-ON
LPA-2.4
2 IN — 4 OUT
9V-16V
40V / 400W @ 4 Ohms
DC Offset / Remote
9.5V RMS
3V—7V
20Ω, 60Ω, 20KΩ
<120Ω
-28dB—+1dB
>110dBA @ 6.4V Output
< 0.01%
0.5V—40V
10Hz—20kHz
40mA
<250Hz
0dB to +12dB
YES
OPTIONAL (PN: LPA-REM)
Stamped Steel
18AWG / Screw Type
Advertisement
