Download Print this page

Flyron Technology FNP-703A User Manual

Mini pir motion sensor activated audio player

Advertisement

Quick Links

Flyron Technology Co., Ltd.
www.flyrontech.com
FNP-703A Mini PIR Motion Sensor Activated Audio Player
User's Manual
V2.0
1. Features
1). Small and exquisite with MP3 high quality audio output.
2). Equipped with a PIR motion sensor to trigger audio playback, and detection range can be up to 4 meters.
3). Built-in 4MB flash memory, and audio files can be downloaded onto the flash memory via USB connection with PC.
4). Able to insert a micro SD card directly, and support max. 32GB micro SD card.
5). Buttons A and B are corresponding to previous track and next track.
6). Supports two trigger modes: all repeat mode and single repeat mode.
7). Two-level sound volume adjustment.
8). Supports two power supply modes: 3 pieces AAA alkaline batteries or an external power adapter through the micro
USB port.
9). Size: 90 x 60 x 26mm
2. Technical Parameters
- 1 -

Advertisement

loading

Summary of Contents for Flyron Technology FNP-703A

  • Page 1 Flyron Technology Co., Ltd. www.flyrontech.com FNP-703A Mini PIR Motion Sensor Activated Audio Player User’s Manual V2.0 1. Features 1). Small and exquisite with MP3 high quality audio output. 2). Equipped with a PIR motion sensor to trigger audio playback, and detection range can be up to 4 meters.
  • Page 2: Appearance Introduction

    Flyron Technology Co., Ltd. www.flyrontech.com Power Input DC3.3-5V Regulated Power Supply Standby State ≤60uA Working Current Playing State ≤130mA Audio Format Audio Output Power 8Ω/1W(typical value) ≤4m(120°angle) Detection Range 3. Appearance and operation guide 3.1. Appearance introduction PIR sensor Slide Switch...
  • Page 3 Flyron Technology Co., Ltd. www.flyrontech.com The operation is easy and simple. There are just one micro USB port, one indicator light, two buttons A and B, one slide switch in total. Notes: 1). The PIR sensor needs about 15 seconds for initialization whenever it’s powered on. It’s normal the device doesn’t trigger to play the sound during this period of time.
  • Page 4: Installation

    Flyron Technology Co., Ltd. www.flyrontech.com 8). Safely remove the player (simulated USB flash drive) from computer. Besides, you can directly use a micro SD card, if the internal flash memory is not large enough for your purpose. Download audio files onto the micro SD card on computer in advance, and then insert it onto micro SD slot of the device.
  • Page 5 Flyron Technology Co., Ltd. www.flyrontech.com Answer: This is caused by unstable power, because battery power is low or voltage is unstable. Please replace the battery. Question 3: After powering it on, in a period time there is no response or reaction is not sensitive, such as delay phenomenon.