EDU-004.
Warranty and Do not forget.
Cebek educational modules included in the EDU serial offer several practices to analyse,
experiment and to learn basic knowledge on the studied theme. Nevertheless, their
function is not to make a mini-class on each theme, but to complete and to be used as
basis, as well as to allow to experiment on the theoretical theme evocated by the teacher.
For this reason, we suggest you to use modules form the EDU serial under the
supervision and the direction of a teacher.
Cebek doesn't offer a consulting service as concern the theoretical or the operating
principles concerning the theme deal with the module. It only offers a technical assistance
regarding questions and problems coming from the circuit's internal operating mode.
All Cebek modules included in the EDU serial have a warranty of 3 years as concerning
components and labour man. All damages provoked by external causes (from the circuit),
as well as wrong connections or installations or due to an operating mode no indicated
into the module's documentation won't be covered by the warranty. More over, all wrong
or incorrect handling won't be excluded from the warranty. For any claim, you have to
present the corresponding invoice.
To contact our technical department, you can send a message to
fax :Nº+34.93.432.29.95 or a mail to the following address: CEBEK, c/Quetzal, 17-21,
08014 Barcelona (SPAIN).
Rules and Identification of the EDU serial elements.
To make easier the identification and for a single rule as concern different practices and
educational Cebek modules, all common elements will answer to colour code and to a
shape.
Test Point. (TP).
It allows to connect oscilloscope's or multimeter extremities to read parameters
relating to the practice. According to its colour, it will indicate that the Test Point
(TP) is connected to the positive or to the negative of the circuit, as well as reads
concerning current, voltage, load, etc....
TP .
circuit
Red
TP Without current or TP AC.
White
Conmutator / Switch.
According to the colour of the switch, you can control the voltage, the current
Power supply
Red
Jumper.
It allows to close or open a signal or an electrical circuit
Electronic Soldering.
TP .
circuit
TP . Tension
Black
Yellow
Current
Blue
sat@cebek.com
, or a
TP . Courant
Blue
Voltage
Logical
Yellow
Green
2/
pag.
8