Table of Contents
Advertisement
thoroughly. Make sure the shovel cannot get into the drum and become jammed. There
is risk of injury.
Maintenance
1. Always check the condition of the rotary sieve first each time before using. Check the
safety devices, switches and mains cable. Check for loose bolts and screws, poor
alignment, contacting moving parts, broken parts and any other factors that could affect
safe operation.
2. Do not continue to use the machine if there are any signs of damage. In this case, have it
repaired by a qualified technician or contact the Princess Auto Service Department.
Replacing the Drive Belt
1. Unscrew the three screws on the cover and remove housing.
2. Loosen the nut at the rear side of the housing by using a suitable open wrench and
replace the drive belt with a new one of the same type. A spare part can be ordered
from Princess Auto
3. Lubricate the gearwheels with clean machine grease.
4. Reattach the drive belt cover on the housing prior to use the rotary sieve again.
Cleaning and Storing
1. Pull the power plug before cleaning or maintaining the rotary sieve.
2. Clean the rotary sieve with a hand broom. For cleaning the motor housing use a dry
cloth.
3. Keep the rotary sieve dry and free from stubborn dirt. Store the rotary sieve in a dry and
frost‐free location.
4. Transport the rotary sieve as shown in the picture.
7
Advertisement
Table of Contents
