Page 2
Change History This document describes VT-TABLET-5082 briefly and is intended for all readers. This table describes the version and release date. Version Date Description Author First release. Deng Shan 2021/4/23 2021/7/21 Update interface Kang Update interface,add FCC 2021/8/18 Shun Zhang...
Page 3
Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior written notice.
Page 4
Limitation of Liability/Non-warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty.
Page 5
Clean with a damp cloth. Do not try cleaning exposed electronic components unless with a dust collector. Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults: The device is damaged.
VT-TABLET-5082 1. Overview 1.1 Introduction Thank you for choosing Vantron. It is our commitment to provide our valued customers with the embedded devices equipped with the state-of-the-art technology and product services. Tablet enables interaction between operators/users and applications, connects industrial control products such as wireless, transducer, built-in battery, storage, etc.
User Manual VT-TABLET-5082 1.2 Order Information Table 1-1 is an example of order information. Table 1-1 Order information 5V/9V DC Input ,8 '' IPS TFT LCD, RK3566, Quad-core 1.8 GHz, OTG VT-TABLET-5082 TYPEC USB, Two SPEAKERS, WIFI a/b/g/n/ac BT5.0 etc.
User Manual VT-TABLET-5082 2. VT-Tablet-5082 Hardware Instructions 2.1 Product Appearance Figure 2-1 Figure 2-2 show the views of our product. Figure 2-1 Top view...
Page 10
User Manual VT-TABLET-5082 Figure 2-2 Back view...
User Manual VT-TABLET-5082 2.2 Specifications Table 2-1 shows the specifications. Table 2-1 Specifications RK3566+RK809-5, Quad-core ARM Cortex-A55 (up to 1.8GHz) Processor LPDDR4-2400 2GB Flash eMMC 32/64GB 8” LCD, Resolution1280x800. Color depth: 16.7M. Display brightness : Typical 250 cd/m2 Capacity Touch screen, support 5 point and double tap to wake...
User Manual VT-TABLET-5082 Storage -20C ~ +60℃ Temp. 2.3 Buttons Power Button Power off the device and on/off the screen. Volume buttons You can use volume up and down buttons to adjust the volume and use the down button to download the software.
User Manual VT-TABLET-5082 2.4.4 Support FM function, Frequency 87~108MHz. 2.4.5 Wi-Fi and Bluetooth The tablet supports 802.11 a/b/g/n/ac Wi-Fi and BLE 5.0 With 2 internal antennas, both Wi-Fi and BLE can achieve better performance. 2.5 Packing List Table 2-2 describes the packing information.
User Manual VT-TABLET-5082 3. Software Instruction VT-TABLET-5082 has been pre-loaded with Android image, so the system can run Android tool to update the system image. For more information, please refer to VT- TABLET-5082_User_Guide.pdf...
User Manual VT-TABLET-5082 4. Device instructions , Power supply: This device only supports 5V DC input. Please use the adapter provided with the DC- Jack. , Typec usb supports both host and client modes. 3), Enter the download mode method: 1) Hold down the download key (the middle of the three keys) on the board.
Unauthorized changes to this product or its components are prohibited. In the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help.
Page 17
Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e-...
User Manual VT-TABLET-5082 6. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the VT-TABLET-5082 and is the answer not in the manual?
Questions and answers