Page 2
• Follow the instructions below to make sure that you install and use the product safely. • You may only connect this product using other products from Rusta’s lighting system (Belys). To connect the light, you must use a Belys transformer or another Belys product that is connected to the Belys system’s transformer.
Page 3
aSSeMBLy 1. Screw the ground spike firmly into the post that houses the light fixture. 2. Put the light into the ground. If the ground is hard, we recommend softening it up before putting the light in. Check that the light is firmly in place. 3.
Page 4
• LED-Lamporna är ej utbytbara. • Belysningen är godkänd för utomhusbruk. • Max belastning för systemet är 24 W. fÖrPacKninGenS inneHÅLL • 1 st gångbelysning Hammersmith 1,8 W • 1 st markfäste anVÄndninG • Belysningen ska användas utomhus. • Rengör belysningen med en mjuk, fuktig trasa.
Page 5
MonTerinG 1. Skruva fast markfästet i stolpen på belysningsarmaturen. 2. Placera belysningen i marken. Är marken hård rekommenderas att den mjukas upp innan belysningen placeras. Kontrollera att belysningen sitter stadigt. 3. Anslut belysningen till Belys-transformator alternativt annan Belys-produkt som är ansluten till Belys-systemets transformator.
Page 6
• LED-Lampene er ikke utskiftbare. • Belysningen er godkjent for bruk utendørs. • Maks belastning for systemet er 24 W. forPaKninGenS inneHoLd • 1 stk gangbelysning Hammersmith 1,8 W • 1 stk markfeste BruK • Belysningen skal brukes utendørs. • Rengjør belysningen med en myk, fuktig klut.
Page 7
MonTerinG 1. Skru fast markfestet i stolpen på belysningsarmaturen. 2. Plasser belysningen i marken. Er marken hard, anbefales det å myke den opp før belysningen plasseres. Kontroller at belysningen sitter stødig. 3. Koble belysningen till Belys-transformatoren eller annan Belys-produkt som er kobled till Belys-systemets transformator.
Need help?
Do you have a question about the Hammersmith and is the answer not in the manual?
Questions and answers