Subscribe to Our Youtube Channel
Summary of Contents for GESTRA KH
- Page 1 Steam-Powered Condensate-Return Unit Original Installation Instructions 850801-00...
-
Page 2: Table Of Contents
Contents Foreword ............................... 3 Availability .............................. 3 Other applicable documents ........................3 Formatting features in the document ..................... 3 Safety ..............................3 Use for the intended purpose ......................... 3 Basic safety notes ..........................4 Qualification of personnel ........................5 Protective gear ............................5 Typographic features of safety notes ..................... -
Page 3: Foreword
KH safely and efficiently for its intended purpose. The steam-powered condensate- Formatting features in the return unit KH will be called unit in this document document. This installation & operating manual is intended Certain text elements of this installation &... -
Page 4: Basic Safety Notes
Otherwise leaks GESTRA employees or specially trained may occur and hot or toxic fluid could electronics technicians. When working on escape. -
Page 5: Qualification Of Personnel
Risk of minor injuries lifting and transporting loads Sharp edges on internals present the observing all notes and instructions in this danger of cuts to hands. Always wear installation & operating manual and the industrial gloves when servicing the unit. applicable documents ... -
Page 6: Typographic Features Of Safety Notes
This note warns against situations that Note that condensate inlet and outlet lines have may lead to environmental and/or to be fitted with GESTRA non-return valves property damage. type RK, the condensate return unit must be equipped with a pressure gauge and a shut-off valve with regulating cone must be installed in the booster steam line. -
Page 7: Application Of European Directives
Make sure that the booster steam line Attention! upstream of the solenoid valve is continuously drained by a GESTRA steam trap. Unit can be damaged if stored or transported improperly. Name plate ➢ Close all openings with the... -
Page 8: Transporting The Unit
➢ Make sure that all these requirements are If you do not have the original packaging always met when storing the unit. use a box that protects the unit adequately against corrosion and physical damage. ➢ Please contact the manufacturer if you cannot comply with the recommended For a short period of time the unit storage conditions. -
Page 9: Connecting The Unit
DANGER CAUTION Personnel working on pipes, vessels and tanks are exposed to safety risks and Environmental damage caused by may suffer severe injuries, poisoning or leaking medium in case of damaged even loss of life. seal! ➢ Make sure that no hot or hazardous ➢... -
Page 10: Commissioning
Commissioning After Operation Attention! DANGER The unit can be damages by corrosion or If the unit is used in contaminated areas other chemical influences. there is a risk of severe injuries or death caused by harmful substances in or on ➢... -
Page 11: Removing External Dirt Deposits
Removing external dirt deposits Putting the unit out of operation ➢ To remove dirt deposits rinse the unit with fresh water and wipe it with a clean, lint- Removing harmful substances free cloth. ➢ To remove any persistent residues use a DANGER cleaning agent that is suitable for the material and carefully wipe the unit with a... -
Page 12: Removing The Unit
➢ Remove all residues from the unit. ➢ For the disposal of all residues observe the DANGER pertinent legal regulations concerning waste disposal. Risk of bruises if the unit or component parts fall down. Removing the unit ➢ Use suitable lifting gear when moving or lifting the unit and/or DANGER component parts. -
Page 13: Returning The Unit
You can download the latest Declaration of removed from the unit. Conformity or Manufacturer's Declaration at ➢ Pay attention to the instructions in section www.gestra.com or request it from the address „Transporting the unit“. below: ➢ Pack the unit in its original packaging or in GESTRA AG suitable transport packaging. - Page 16 Agencies all over the world: www.gestra.com GESTRA AG Münchener Straße 77 28215 Bremen Germany Telefon +49 421 3503-0 Telefax +49 421 3503-393 E-Mail info@de.gestra.com www.gestra.de 850801-00/11-2021 _mw © GESTRA AG Bremen Printed in Germany...
Need help?
Do you have a question about the KH and is the answer not in the manual?
Questions and answers