Table of Contents
Advertisement
Installation
The following items are included with each DI-159 PLC. Verify that you have the following:
A DI-159 PLC data acquisition instrument.
l
USB cable.
l
A DATAQ Instruments screwdriver for signal lead connections.
l
If an item is missing or damaged, call DATAQ Instruments at 330-668-1444. We will guide
you through the appropriate steps for replacing missing or damaged items. Save the original
packing material in the unlikely event that your unit must, for any reason, be sent back to
DATAQ Instruments.
Installing Windows Drivers
USB Drivers for the DI-159 PLC can be installed via a downloadable executable directly from
the DATAQ Instruments web site. No CD is shipped with the device. If you are going to
install and run the DATAQ Instruments DI-159 PLC Terminal Emulator program, you do not
need to install the drivers separately - the Terminal installation program will also install the driv-
ers (see
DATAQ Instruments Terminal Emulator
1. Disconnect all DATAQ Instruments USB devices from your Computer.
2. Go to
http://www.dataq.com/159
for installation instructions).
in your web browser.
7
Advertisement
Table of Contents
