Buffalo Tools GUCMBLS Assembly Instructions

ITEM # GUCMBLS UTILITY CEILING BIKE LIFT
ASSEMBLY INSTRUCTIONS
A
ATTENTION
Thread the nylon rope through the pulley system before mounting to ceiling. Start
by threading the rope through the clutch brake device as shown. Follow the thread
route (A - F). Be sure the hooks at (B) and (E) face inward. Thread the end of the
rope through the center hole in the bracket (F). Tie a double knot to secure the end.
WARNING
DO NOT OVERLOAD!
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR
UNSAFE, DO NOT USE THIS PRODUCT!
If you experience a problem, have questions or need parts for this product,
call Customer Service at 1-636-532-9888, Monday - Friday, 8 AM - 4 PM
Central Time. A copy of the sales receipt is required. KEEP THIS MANUAL,
SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
WARNING
Do not support any item other than the intended product use. This is not a toy -
keep out of reach of children. Serious injury can occur if this item is misused.
Excessive weight will cause the pulley to grind, become hard to operate, and
may fray the rope, leading to possibe failure. When calculating the weight of the
bike, include all bags and accessories that might be attached when lifted.
C
B
Max Weight Capacity is 44 lbs.
D F
E