Advertisement
ASSEMBLY : STEP 3
USING THE SCREWS PROVIDED, ATTACH
EACH BASE TO THE TOP, ONE AT A TIME.
THERE ARE A TOTAL OF TEN (10) SCREWS
PER FOLDING PAN: FOUR (4) SCREWS
WITH PRE-DRILLED HOLES AND SIX (6)
ADDITIONAL WITHOUT PRE-DRILLED HOLES.
(DIAGRAM 2)
REPEAT WITH OTHER BASE. (DIAGRAM 3)
ASSEMBLY : STEP 4
TEST FOLDING MECHANISM TO ENSURE
PROPER OPERATION.
ASSEMBLY : STEP 5
TURN TABLE UPRIGHT. ADJUST GLIDES TO
LEVEL THE SURFACE. (DIAGRAM 4)
ENJOY YOUR NEW VERSTEEL TABLE!
A S S E M B LY I N S T R U C T I O N S :
3
4
S :
V E L A F O L D I N G T A B L E L E G S
Regular
Cantilevered
270.INS.VEF 309
Advertisement
