Download
Share
Print this page
kala XK3190-DS1 Operation Manual
  1. Manuals
  2. Brands
  3. kala Manuals
  4. Accessories
  5. XK3190-DS1
  6. Operation manual

kala XK3190-DS1 Operation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
XK3190-DS1
Weighing indicator
O
P
E
R
A
T
I
O
N
M
A
N
U
A
L
O
P
E
R
A
T
I
O
N
M
A
N
U
A
L
O
P
E
R
A
T
I
O
N
M
A
N
U
A
L
2006.9

Advertisement

loading
Need help?

Need help?

Do you have a question about the XK3190-DS1 and is the answer not in the manual?

Questions and answers

Summary of Contents for kala XK3190-DS1

  • Page 1 XK3190-DS1 Weighing indicator 2006.9...
  • Page 2 C O N T E N T Chapter 1. Technical parameter Chapter 2. Installation 1. front and rear display of the indicator 2. connect to the load cell 3. connect to printer 4. connect to scoreboard 5. connect to serial port Chapter 3.
  • Page 3 X K 3 1 9 0 - D S 1 Chapter 1. Technical parameter 1、Model： XK3190-DS1 2、Signal interface： Interface available： RS485（2 line or 4 line） Transmission distance： ≤1000 meter Transmission speed： ≤19200 baud Signal power： DC12V，≤400mA Digital interface capability： ≤16pcs digital load cell or digital module（note 1-1）...
  • Page 4 (2－2 ) back view 2. connect to digital load cell XK3190-DS1 is digital weighing indicator, it can only be connected to digital load cell, please kindly note the load cell mentioned in the following text represents digital load cell. 1、the indicator connect to load cell through 9 pin connector. Picture 2-3 indicat the signification of each pin 2、...
  • Page 5 X K 3 1 9 0 - D S 1 instruction Send negative signal (-TXD） Send positive signal（＋TXD） Receive negative signal（－RXD） Receive positive signal（＋RXD） Digital load cell positive power （ ＋） Digital load cell negative power （－） (2-3) digital load cell interface and instruction (2-4) 4 wire RS485 and 2 wire RS485 interface method connect to printer standard printer interface adtops 25 pin RS232 connector, the definition of each pin is as...
  • Page 6 X K 3 1 9 0 - D S 1 cause to indicator or printer if any step is wrong. Please pay serious attention to this. ▲！Please connect the indicator to our recommended printer model, due to a different printer model might have problem with the indicator compatibility.
  • Page 7 (2-7) communication interface definition 1. serial communication instruction： serial data frame is :n,8,1: 8 data bit, 1 stop bit, no check bit;XK3190-DS1 serial communication has continuous communication method and command communication method, serial method has 3 types; through TF parameter (please refer to the chapter 3 for the detail).
  • Page 8 X K 3 1 9 0 - D S 1 Diagram 2-1 instruction example ( send＋20.00 ) The X byte content Content code content Hex code Start (XON) +or- Symbol bit 2B/2D Highest bit 30～39 30～39 Weighing 30～39 data 30～39 30～39 Lowest bit 30～39...
  • Page 9 X K 3 1 9 0 - D S 1 XOR＝2⊕3 Indicator will output the content as diagram2-3： Diagram 2-3 example（command A） The X byte Instruction content Code(binary) Start from 02(XON) Address code A～Z（*NOTE 2-2） Command A：handshake Command B：send GW Command C：send TARE Command D：send NW A～H...
  • Page 10 X K 3 1 9 0 - D S 1 NW, format: a： signal(+or-) b： NW value ( 6 bit) Command D Each frame is composed by … (from high to low) 14 groups data h： the decimal point is from right to left( 0～ Vehicle number, format: A：...
  • Page 11 X K 3 1 9 0 - D S 1 2. communication parameter setting of the indicator： (1). Communication parameter Communication parameter is composed of communication address, baud rate and communication method. (2). Please refer to the communication parameter setting part in section 1 of chapter 3 for the parameter setting Chapter 3.
  • Page 12 X K 3 1 9 0 - D S 1 Parameter Type Code Parameter Type Customrize record format Weighing bill format 16~27 Standby Inner code display Standby PC text download 31~39 Standby Clear all the goods No. and the relative content Clear all the customer No.

  • Page 13: Table Of Contents

    X K 3 1 9 0 - D S 1 rate, we can press. 【Input】 , and continue the next parameter setting. If we don’t want to continue, we can just press【Weigh】to return the weighing status. Note 3-1-2：Communication address “1～26” corresponds “A～Z”’s ASCII code value. This means when we’re communicating with the PC, the address in the command line should just be the ASCII value of “A～Z”...
  • Page 14 X K 3 1 9 0 - D S 1 Press【Input】 1 to 3 corresponds 1 to 3 copies （03 parameter） (Note3-1-4） For example “3” The minimum valid weight for the Press【1000】 auto printing mode（no less than 10 （04 Press【Input】 divisions）...

  • Page 15: Printing Parameter Setting

    X K 3 1 9 0 - D S 1 open Axle weight unlock parameter: （00～ Press【01】 99 ） ， means axle weight unlock （14 Press【Input】 percentage. For example: 16 means parameter） 16% of Un lock Weighing Printing parameter setting over Status Note 3-1-4：Printing copies setting is only valid when we select the printing copies mode （see step 9, we should choose “1”...
  • Page 16 X K 3 1 9 0 - D S 1 1：Input the customer’s No. when save printing 0：Use the default goods No. when save printing digit 1：Input the goods No. when save printing 0：Use the default vehicle No. when save printing. digit 1：Input the vehicle No.
  • Page 17 X K 3 1 9 0 - D S 1 ① One time weighing and saving：As one time weighing is over, press【Save print1】 to save the record and print. ② When the tare weight is known，press【Save print2】to save the record；Or there is no tare weight(vehicle No.

  • Page 18: Table

    X K 3 1 9 0 - D S 1 B. Twice weighing【Save print2】 （Table 3-2-2） Step Operate Note Display Press 【 Save print2】 Input the vehicle No. (See note 3-2-1) Press【 1234】 For example “01234” Press【Input】 Input the goods No. Press【123】...
  • Page 19 X K 3 1 9 0 - D S 1 1. Type in the preset tare weight with the keyboard：（*：default value） Step Operate Display Note Press【Truck No.】 Input the truck No. Input the truck No. For example “35790” Press【Input】 Input the tare weight Input the tare For example：1000(kgs) weight...

  • Page 20: Press 【Parameter】 1 Press【2

    X K 3 1 9 0 - D S 1 Detail setting please refer to Table 3-2-3 Table 3-2-3： Step Operate Note Display Input the parameter/function Press【Parameter】 code 14：Record format Press【1】【4】 （Transversprinting Press【Input】 copies&general list） 15：Vertical printing copies For example”14” Press【Input】...
  • Page 21 X K 3 1 9 0 - D S 1 11：Date/Time（Only valid for the user-defined record format） Note 3-2-4 ： If we choose vertical printing copies format, indicator will display Note 3-2-5：the contend of the 10th row must be setted. When we don’t want to print this row, set the value to be “00”.
  • Page 22 X K 3 1 9 0 - D S 1 Report for the weighing records of a certain customer No. Report for the weighing records of a certain note Report on conditions in user-defined format Report by truck No. Report by goods No. Report by customer No.
  • Page 23 X K 3 1 9 0 - D S 1 Press【Input】 For example “123” Press【45】 Input the customer No. For example “45” Press【Input】 Press【67】 Input the note No. For example “67” Press【Input】 Printing the report，and return to the weighing mode when printing over Note 3-2-6：6 digits for the conditions choosing: 0：Without the note No.
  • Page 24 X K 3 1 9 0 - D S 1 parameter 82: Print printing parameter 90: Print the goods No. and goods name 91: Print the customer No. and the customer name 92: Print the note No. and the note 93: Print the company’s name 99: Print all the code and and corresponding information.
  • Page 25 X K 3 1 9 0 - D S 1 Press【1】 Choose the checking condition Press【Input】 For example“1”，by date checking Input the date Press【40101】 For example 2004.1.1 press【Input】 Then the indicator will display the records group of record Press【Input】 Time（hr、min、seconds） Press【input】...
  • Page 26 X K 3 1 9 0 - D S 1 Table 3-3-2 Step Operate Display Note At weighing If there is no checking mode code ， we will enter the Press【Check】 step 2 directly after we Press【888888】 press【Check】 press【Input】 We choose “6” to enter Press【6】...
  • Page 27 X K 3 1 9 0 - D S 1 2．Before deletion, the indicator will display to confirm with the user about the delete operation. We input a non-zero value, and press【Input】key to confirm. Also we can input “0”, and press【Input】or【Weigh】key to cancel the delete. 3．Operation (Corresponds to above 1~9 methods)：...
  • Page 28 X K 3 1 9 0 - D S 1 3.4 text input and text delete 1． There are two methods to edit the text. One is directly input on the indicator. The other is by a computer 2． The indicator can save 20 English letters for the company name(16 English letters for the built-in micro printer);...
  • Page 29 X K 3 1 9 0 - D S 1 Press【0034】 Input the ASCII code for Press【Input】 the first letter. For example: “0034”（A） Press【20】 second letter Press【Input】 inputting For example: “0020”（3） Press【0034 】 The third letter inputting Press【Input】 For example: “0034” (A) Press【21】...
  • Page 30 X K 3 1 9 0 - D S 1 --Input by a computer 1. There are six commands that can be sent by PC. Two are for control. The other 4 are for transfer from No. to text info. All the command row begin with “@”. The capital letter “A、B、C、D、E”...
  • Page 31 X K 3 1 9 0 - D S 1 of the note. The content of the note must be in a set of ‘’. The lenth of the note should be less than 10 English letters. Example：@C001: ‘Fresh’; Transfer the note No. 001 to note content“Fresh” (4) Edit the company name：...
  • Page 32 X K 3 1 9 0 - D S 1 Table 3-4-5 Step Operate Display Note Choose the function code 40 Delete all goods name. 41 Delete all customer nane Press 【 Parameter】 42 Delete all note Press【40】 43 Delete company name Press【Input】...
  • Page 33 X K 3 1 9 0 - D S 1 light will be on. ②. Pre-tare： Press [pre tare] key at weighing status, indicator will display . The displayed data is the former tare weight. If you need to set new tare weight, just input by numeric key and then press [input] to confirm.
  • Page 34 X K 3 1 9 0 - D S 1 XK3190-DS1 can be used in the static axis weighing ststem. Please check the following table for your reference to see how the indicator work in the Static axis weighing work mode. Before setting, assure to set parameter “yA” as 1 to...
  • Page 35 X K 3 1 9 0 - D S 1 pressure vessel canned system is forbidden. ! The mount lightning rod should be installed in order to assurin g the safe of the ▲ operator and avoid the damage to the indicator and relevant instruments in thunderstorm frequently happening area.
  • Page 36 X K 3 1 9 0 - D S 1 4.9 If the trouble caused naturally in the normal operating conditions during one year from the sale, it be within the repair guarantee. Please send the indicator and the repair guarantee card (with the same No.) to the appointed repair center or the supplier.
  • Page 37 X K 3 1 9 0 - D S 1 11. Err 19 Can’t print due to 0 or negative value. 12. Err 28 Date for printing is less than saved date in indicator. 5.3 Code for wrong set up 1.
  • Page 38 X K 3 1 9 0 - D S 1 0004 20.44.36 00001 Orange 1.000 0.100 0.900 FAS.Co 0005 20.45.00 00001 R3 Steel 1.000 0.100 0.900 FAS.Co Jack 0006 20.45.10 00002 R3 Steel 1.000 0.100 0.900 FAS.Co Jack Accum： Gross W.: 7.003 t Net W.: 4.603 t Linked format：(Column) Shanghai Xinxing Trading Co.
  • Page 39 X K 3 1 9 0 - D S 1 20：06 00001 Liquefied gas 2.003 1.000 1.003 FAS.Co 20：21 00123 Anthracite coal 1.000 1.000 0.000 Yaohua Co. 20：41 00001 Orange 1.000 0.100 0.900 FAS.Co Jack 20：44 00001 Orange 1.000 0.100 0.900 FAS.Co Jack...
  • Page 40 X K 3 1 9 0 - D S 1 0001 0002 3.003 1.003 0002 Jack 0002 2.000 1.800 0003 Mike 0002 2.000 1.800 Appendix 3: Information contrast Company name: Shanghai Xinxing Trading Co. Contrast for cargo no. 001: Anthracite coal 002：Orange oal Anthracite coal Anthracite coal 003：R3 Steel...
  • Page 41 X K 3 1 9 0 - D S 1 Input tare Input【1000】 weight Press【INPUT】 Display Gross/net weight, tare sign light on. Note: At this time, indicator automatically converted to net weighing display mode (press 【G/N】 can convert weighing mode) Waiting press【save Display previous truck no., hint user to...
  • Page 42 X K 3 1 9 0 - D S 1 under this step, previous note and hint for new note won’t be displayed, directly change to step 12 (Please refer to chapter 3 “Printing Parameter Setting”. Input note Input【05】 Press【INPUT】 Print weighing bill 2.
  • Page 43 X K 3 1 9 0 - D S 1 Step Condition Operation Display Note need to input new truck no. Display previous goods no., hint user to input new goods Input【011】 Input goods Press【INPUT】 Display previous customer, hint user to input new customer.
  • Page 44 X K 3 1 9 0 - D S 1 setting” part) Display automatically print previous setting parameter Select Input【1】 refer to Chapter 3 “Print automatic Press【INPUT】 Parameter setting” part printing Select printer (Note: for all printing operation, don’t select “0”) If printer has Press【Weigh】...
  • Page 45 X K 3 1 9 0 - D S 1 Step Condition Operation Display Note user to input new goods no. Send new Input【011】 Input new goods no. goods no. Press【INPUT】 Display previous customer, hint user to input new customer Input customer Input【11】...