SIOX MIDI SMOKE 2 Manual

Hide thumbs

Table of Contents

Quick Links

Download this manual

Product description: MIDI SMOKE 2

Function:

Control and supervision of fire and smoke dampers

SIOX module:

8EX2:002 (SX:ACCESS)

Table of Content

General..................................................................................................................................................3

System setup.........................................................................................................................................3

Key legends..........................................................................................................................................3

Digital I/O.............................................................................................................................................3

Central unit panel..................................................................................................................................3

Menus...................................................................................................................................................3

Main menu............................................................................................................................................7

Service Mode........................................................................................................................................7

Reset pin code to factory default..........................................................................................................7

Change language...................................................................................................................................7

Alarms..................................................................................................................................................7

Fire cells...............................................................................................................................................8

Function test all dampers......................................................................................................................8

Watchdog..............................................................................................................................................8

Functional test setup.............................................................................................................................8

Setting up date/time..............................................................................................................................9

Run indication relay output/Operational mode....................................................................................9

Module addressing................................................................................................................................9

Simple system setup...........................................................................................................................10

Module configuration.........................................................................................................................10

Change PIN code................................................................................................................................11

Change IP-address..............................................................................................................................11

Change IP-gateway address................................................................................................................11

Change subnet mask...........................................................................................................................11

Change port number for TCP/IP.........................................................................................................11

Set exercise start delay.......................................................................................................................12

Show digital input status.....................................................................................................................12

Show digital output status...................................................................................................................12

Set service mode timeout....................................................................................................................12

Set SIOX Repeats...............................................................................................................................13

Show system program version............................................................................................................13

Step-by-Step instructions to commission a system using MIDISMOKE_02.cfg..............................13

Step 1: Addressing the modules.....................................................................................................13

Step 2: Perform Simple System Setup...........................................................................................14

Step 3: Setup dampers and alarm points........................................................................................14

Step 4: System test.........................................................................................................................14

Step 5: Setup the run indication relay output.................................................................................14

Step 6: Set RTC..............................................................................................................................14

Step 7: Functional test settings......................................................................................................14

Step 8: System test.........................................................................................................................14

Step 9: Change the PIN code.........................................................................................................14

Step 10: Activate watchdog...........................................................................................................14

Profcon AB

Page 1

www.smokecontrol.net

Table of Contents

Need help?

Do you have a question about the MIDI SMOKE 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for SIOX MIDI SMOKE 2

Page 1: Table Of Contents
Product description: MIDI SMOKE 2 Function: Control and supervision of fire and smoke dampers SIOX module: 8EX2:002 (SX:ACCESS) Table of Content General..............................3 System setup............................3 Key legends............................3 Digital I/O.............................3 Central unit panel..........................3 Menus..............................3 Main menu............................7 Service Mode............................7 Reset pin code to factory default......................7 Change language...........................7...
Page 2 Step 11: Set time for automatic exit from Service Mode...............14 Step 12: Let the system enter normal operation................14 Step-by-Step instructions to commission a system using SMOKE EDIT..........15 Step 1: Addressing the modules.....................15 Step 2: Download the configuration file..................15 Step 3: System test.........................15 Step 4: Set RTC..........................15 Step 5: Change Pin Code.......................15 Step 6: Activate watchdog......................16...
Page 3: General
DI4, terminals 7-8, when momentarily MIDI SMOKE 2 has a display and key pad to check closed (>1,5 s) requests a Function Test Cycle current status, set up the system, carry out function (exercise) where all dampers will close and then tests and reset smoke detectors.
Page 4 MidiSmoke menu system Only in LANGUAGE: Service Mode ENGLISH 2018-02-20 15:26 Main menu SYSTEM: OK ALARMS FIRE:OTHER DAMPER 2 EXT.FIRE 1:1 DAMPER ERROR FC1 FIRE CELLS FIRE CELL 1 2 AP 10 DAMPERS FUNC. TEST ALL ALARM POINT 1 DAMPER 1 DAMPERS? <ENTER>...
Page 5 From previous page Only in Service SIMPLE SYSTEM- SEARCHING... FOUND MODULES Mode. Not when CONFIGURATION NMBR:2 A:1 SC2 NMBR:2 A:1 SC2 using SmokeEdit Only in Service MODULE- CONFIGURATION FOR Mode. Not when CONFIGURATION ADDR:1 LP S1 S2 using SmokeEdit Only in CHANGE PIN-CODE NEW PIN: 5555 Service Mode...
Page 6 Service Mode OUTPUT DO4:CLOSED Only in SET SERVICE MODE SERVICE MODE Service Mode TIMEOUT TIMEOUT INACTIVE Only in SET SIOX REPEATS SIOX REPEATS:3 Service Mode H:3 G:0 A:1 Only in EX2 VERSION Service Mode EX2 v1.61 Profcon AB Page 6...
Page 7: Main Menu
EXT.FIRE is the DI1 Fire Alarm dampers are opened and automatic or via DI4 re- input on the MIDI SMOKE 2 module. DI2 must be quested functional tests are suppressed. However, activated (>1,5 s) to unlatch this alarm.
Page 8: Fire Cells
Pressing Enter will show a list of the pectedly due to disruptions in the execution of the predefined alarm points or dampers in the current MIDI SMOKE 2 controller. A cyclically displayed fire cell as in the examples below. Press Down warning text “WATCHDOG INACTIVE” will be...
Page 9: Setting Up Date/Time
OPEN AT FIRE – relay opens in case of fire alarm. When Enter is pressed the MIDI SMOKE 2 starts FIRE+FUNC.TEST – relay opens in case of a fire to send addressing commands. All damper control alarm or a function test is being performed.
Page 10: Simple System Setup
Activate this setup function by pressing Enter. It This menu shows damper control modules that are will scan the SIOX bus over the address range 1- addressed in the system. If “AP” for “Alarm Point” 59 and count the number of modules found.
Page 11: Change Pin Code
Please note: if a direct connection between the Change port number for TCP/IP (Service Mode) MIDI SMOKE 2 and a PC (Windows) is desired, it will be necessary that the IP-address for the PC CHANGE TCP/IP PORT and the MIDI SMOKE 2 shares the same network address space.
Page 12: Set Exercise Start Delay
To toggle the output status press Left key or Right key. Please note that as long as these Set exercise start delay (Service Mode) menues are active, MIDI SMOKE 2 is not able to Introduced in firmware 1.60 control the output statuses. Also be aware that...
Page 13: Set Siox Repeats
Pressing Up arrow increases the time with 1 hour SMOKE EDIT for configuration. for each keypress up to a maximum of 72 hours. The MIDI SMOKE 2 is normally preloaded with a Press “C” to exit the command and keep the old configuration file (“MIDISMOKE_02.cfg”) intended setting.
Page 14: Step 2: Perform Simple System Setup
Keep a Step 4: System test note of the new one in a safe place. At this point the MIDI SMOKE 2 unit is communicating with the damper modules in the See Change PIN code menu description.
Page 15: Step-By-Step Instructions To Commission A System Using Smoke Edit
”Properties”. This can also be changed by This concludes the setup and configuration task. using the key pad on the MIDI SMOKE 2 but the project file should be updated as well. To download a corrected project file is of course the preferred method.
Page 16: Step 6: Activate Watchdog
MIDI SMOKE 2 supports the three-wire concept between 1 – 72 hours. that is used by the Smoke Control products. The three wires are SIOX, power (G) and ground (G0). See Set Service mode timeout menu description. Terminal 10 is used for the outgoing SIOX bus.
Page 17: Digital Inputs
Modbus TCP or SioxNet communi- cations. Loading of SMOKE EDIT configurations are also done using the Ethernet connection. The picture on the next page shows the electrical connections for the MIDI SMOKE 2. Profcon AB Page 17 www.smokecontrol.net...
Page 18 MidiSmoke2_ProdDescr_12en.odt 2018-05-30 /YE Profcon AB Page 18 www.smokecontrol.net...