Do you have a question about the MG75 and is the answer not in the manual?
Questions and answers
Ryan Moore
May 24, 2025
Hello, our wine cooler stopped cooling, the fan doesn't work.
1 comments:
Mr. Anderson
May 26, 2025
If the Moosoo MG75 wine cooler has stopped cooling and the fan is not working, follow these troubleshooting steps:
1. Check Power Supply: - Ensure the cooler is plugged in. - Make sure the appliance is turned on. - Check if the circuit breaker has tripped or if a fuse has blown.
2. Check Temperature and Environment: - The external environment may require a higher cooling setting. - Ensure the room temperature is within the recommended range (above 16°C/60°F and below 32°C/90°F).
3. Check Door and Seal: - Make sure the door is closed completely. - Ensure the door gasket seals properly. - Avoid opening the door too often.
4. Check for Overloading: - Remove excess bottles that may be restricting airflow.
5. Level the Appliance: - Make sure the chiller is level to ensure proper operation.
If the issue persists after these checks, further inspection by a qualified technician may be needed.
Page 1
USER MANUAL MODEL: MG75 For any questions and malfunctions of the appliance during use, please contact our customer service email: usa@imoosoo.com...
WINE CHILLER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others.
IMPORTANT SAFEGUIDES Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following: Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.
FLAMMABLE REFRIGERANT GAS DANGER - Risk of fire or explosion. Flammable refrigerant used. DO NOT use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant tubing. DANGER - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel.
OPERATION AND TEMPERATURE SETTING This wine cooler is suitable for the ambient temperature 5-32℃. If temperature is higher or lower than it, the performance may be affected. Temperature setting MG75 ° ° ①LED ON/OFF; ②Temperature up (Press it, temperature will go up 1 degree);...
Page 7
MG75: Fig:1 Fig:2 Fig:3 Fig:4 Fig:5 Fig:6 , A:Glass door B: Hexagonal wrench Procedure to reverse the door: 1. Fig:1,remove the screws on lower hinge by hexagonal wrench. Please hold the door to avoid the door drop down after loosing of screws.
Care and Maintenance Cleaning your wine cooler Turn off the power, unplug the appliance, and remove all items including shelves Wash the inside surfaces with a warm water and soft cloth Wash the shelves with a mild detergent solution ...
TROUBLESHOOTING You can solve many common wine chiller problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the service. Troubleshooting PROBLEM POSSIBLE CAUSE Not plugged in. Wine cooler does not operate.
WARRANTY CUSTOMER CARE The 1-year Limited Warranty is valid for products purchased from our MOOSOO only, starting from the date of the original retail purchased. We will provide customer service for any defects in quality or materials under normal, non-commercial use.
Need help?
Do you have a question about the MG75 and is the answer not in the manual?
Questions and answers
Hello, our wine cooler stopped cooling, the fan doesn't work.
If the Moosoo MG75 wine cooler has stopped cooling and the fan is not working, follow these troubleshooting steps:
1. Check Power Supply:
- Ensure the cooler is plugged in.
- Make sure the appliance is turned on.
- Check if the circuit breaker has tripped or if a fuse has blown.
2. Check Temperature and Environment:
- The external environment may require a higher cooling setting.
- Ensure the room temperature is within the recommended range (above 16°C/60°F and below 32°C/90°F).
3. Check Door and Seal:
- Make sure the door is closed completely.
- Ensure the door gasket seals properly.
- Avoid opening the door too often.
4. Check for Overloading:
- Remove excess bottles that may be restricting airflow.
5. Level the Appliance:
- Make sure the chiller is level to ensure proper operation.
If the issue persists after these checks, further inspection by a qualified technician may be needed.
This answer is automatically generated